Refine
Year of publication
Document Type
- Article (153) (remove)
Has Fulltext
- yes (153)
Is part of the Bibliography
- no (153)
Keywords
- Euterentzündung (22)
- Logistik (20)
- Milchwirtschaft (20)
- Molkerei (13)
- PPS (7)
- Adsorption (6)
- Betriebsdatenerfassung (6)
- Kostenschätzung (6)
- bovine mastitis (6)
- mastitis (6)
Institute
- Fakultät II - Maschinenbau und Bioverfahrenstechnik (153) (remove)
Powder bed-based additive manufacturing processes offer an extended freedom in design and enable the processing of metals, ceramics, and polymers with a high level of relative density. The latter is a prevalent measure of process and component quality, which depends on various input variables. A key point in this context is the condition of powder beds. To enhance comprehension of their particle-level formation and facilitate process optimization, simulations based on the Discrete Element Method are increasingly employed in research. To generate qualitatively as well as quantitatively reliable simulation results, an adaptation of the contact model parameterization is necessary. However, current adaptation methods often require the implementation of models that significantly increase computational effort, therefore limiting their applicability. To counteract this obstacle, a sophisticated formula-based adaptation and evaluation method is presented in this research. Additionally, the developed method enables accelerated parameter determination with limited experimental effort. Thus, it represents an integrative component, which supports further research efforts based on the Discrete Element Method by significantly reducing the parameterization effort. The universal nature of deducting this method also allows its adaptation to similar parameterization problems and its implementation in other fields of research.
Parametric study of piezoresistive structures in continuous fiber reinforced additive manufacturing
(2024)
Recent advancements in fiber reinforced additive manufacturing leverage the piezoresistivity of continuous carbon fibers. This effect enables the fabrication of structural components with inherent piezoresistive properties suitable for load measurement or structural monitoring. These are achieved without necessitating additional manufacturing or assembly procedures. However, there remain unexplored variables within the domain of continuous fiber-reinforced additive manufacturing. Crucially, the roles of fiber curvature radii and sensing fiber bundle counts have yet to be comprehensively addressed. Additionally, the compression-sensitive nature of printed carbon fiber-reinforced specimens remains a largely unexplored research area. To address these gaps, this study presents experimental analyses on tensile and three-point flexural specimens incorporating sensing carbon fiber strands. All specimens were fabricated with three distinct curvature radii. For the tensile specimens, the number of layers was also varied. Sensing fiber bundles were embedded on both tensile and compression sides of the flexural specimens. Mechanical testing revealed a linear-elastic behavior in the specimens. It was observed that carbon fibers supported the majority of the load, leading to brittle fractures. The resistance measurements showed a dependence on both the number of sensing layers and the radius of curvature, and exhibited a slight decreasing trend in the cyclic tests. Compared with the sensors subjected to tensile stress, the sensors embedded on the compression side showed a lower gauge factor.
Mixed-integer NMPC for real-time supervisory energy management control in residential buildings
(2023)
In recent years, building energy supply and distribution systems have become more complex, with an increasing number of energy generators, stores, flows, and possible combinations of operating modes. This poses challenges for supervisory control, especially when balancing the conflicting goals of maximizing comfort while minimizing costs and emissions to contribute to global climate protection objectives. Mixed-integer nonlinear model predictive control is a promising approach for intelligent real-time control that is able to properly address the specific characteristics and restrictions of building energy systems. We present a strategy that utilizes a decomposition approach, combining partial outer convexification with the Switch-Cost Aware Rounding procedure to handle switching behavior and operating time constraints of building components in real-time. The efficacy is demonstrated through practical applications in a single-family home with a combined heat and power unit and in a multi-family apartment complex with 18 residential units. Simulation studies show high correspondence to globally optimal solutions with significant cost savings potential of around 19%.
The aim of this cross-sectional study was to investigate associated factors of the severity of clinical mastitis (CM). Milk samples of 249 cases of CM were microbiologically examined, of which 27.2% were mild, 38.5% moderate, and 34.3% severe mastitis. The samples were incubated aerobically and anaerobically to investigate the role of aerobic and anaerobic microorganisms. In addition, the pathogen shedding was quantitatively examined, and animal individual data, outside temperature and relative humidity, were collected to determine associated factors for the severity of CM. The pathogen isolated the most was Escherichia coli (35.2%), followed by Streptococcus spp. (16.4%). Non-aureus staphylococci (NaS) (15.4%) and other pathogens (e.g., Staphylococcus aureus, coryneforms) (15.4%) were the pathogens that were isolated the most for mild mastitis. Moderate mastitis was mostly caused by E. coli (38%). E. coli was also the most common pathogen in severe mastitis (50.6%), followed by Streptococcus spp. (16.4%), and Klebsiella spp. (10.3%). Obligate anaerobes (Clostridium spp.) were isolated in one case (0.4%) of moderate mastitis. The mortality rate (deceased or culled due to the mastitis in the following two weeks) was 34.5% for severe mastitis, 21.7% for moderate mastitis, and 4.4% for mild mastitis. The overall mortality rate of CM was 21.1%. The pathogen shedding (back logarithmized) was highest for severe mastitis (55,000 cfu/mL) and E. coli (91,200 cfu/mL). High pathogen shedding, low previous somatic cell count (SCC) before mastitis, high outside temperature, and high humidity were associated with severe courses of mastitis.
The aim of this cross-sectional study was to investigate the occurrence of bacteremia in severe mastitis cases of dairy cows. Milk and corresponding blood samples of 77 cases of severe mastitis were bacteriologically examined. All samples (milk and blood) were incubated aerobically and anaerobically to also investigate the role of obligate anaerobic microorganisms in addition to aerobic microorganisms in severe mastitis. Bacteremia occurred if identical bacterial strains were isolated from milk and blood samples of the same case. In addition, pathogen shedding was examined, and the data of animals and weather were collected to determine associated factors for the occurrence of bacteremia in severe mastitis. If Gram-negative bacteria were detected in milk samples, a Limulus test (detection of endotoxins) was also performed for corresponding blood samples without the growth of Gram-negative bacteria. In 74 cases (96.1%), microbial growth was detected in aerobically incubated milk samples. The most-frequently isolated bacteria in milk samples were Escherichia (E.) coli (48.9%), Streptococcus (S.) spp. (18.1%), and Klebsiella (K.) spp. (16%). Obligatory anaerobic microorganisms were not isolated. In 72 cases (93.5%) of the aerobically examined blood samples, microbial growth was detected. The most-frequently isolated pathogens in blood samples were non-aureus Staphylococci (NaS) (40.6%) and Bacillus spp. (12.3%). The Limulus test was positive for 60.5% of cases, which means a detection of endotoxins in most blood samples without the growth of Gram-negative bacteria. Bacteremia was confirmed in 12 cases (15.5%) for K. pneumoniae (5/12), E. coli (4/12), S. dysgalactiae (2/12), and S. uberis (1/12). The mortality rate (deceased or culled) was 66.6% for cases with bacteremia and 34.1% for cases without bacteremia. High pathogen shedding and high humidity were associated with the occurrence of bacteremia in severe mastitis.
In this paper a new rotor position observer for permanent magnet synchronous machines (PMSM) based on an Extended-Kalman-Filter (EKF) is presented. With this method, just one single EKF is sufficent to evaluate the position information from electromotive force (EMF) and anisotropy. Thus, the PMSM can be controlled for the entire speed range without a position sensor and without the need to switch or synchronize between different observers. The approach covers online estimation of permanent magnetic field and mechanical load. The resulting EKF-based rotor position estimator is embedded in the existing cascaded control concept of the PMSM without need of additional angle trackers or signal filters. The experimental validation for the position sensorless control shows optimized dynamic behaviour.
To effectively prevent and control bovine mastitis, farmers and their advisors need to take infection pathways and durations into account. Still, studies exploring both aspects through molecular epidemiology with sampling of entire dairy cow herds over longer periods are scarce. Therefore, quarter foremilk samples were collected at 14-d intervals from all lactating dairy cows (n = 263) over 18 wk in one commercial dairy herd. Quarters were considered infected with Staphylococcus aureus, Streptococcus uberis, or Streptococcus dysgalactiae when ≥100 cfu/mL of the respective pathogen was detected, or with Staphylococcus epidermidis or Staphylococcus haemolyticus when ≥500 cfu/mL of the respective pathogen was detected. All isolates of the mentioned species underwent randomly amplified polymorphic DNA (RAPD)-PCR to explore strain diversity and to distinguish ongoing from new infections. Survival analysis was used to estimate infection durations. Five different strains of Staph. aureus were isolated, and the most prevalent strain caused more than 80% of all Staph. aureus infections (n = 46). In contrast, 46 Staph. epidermidis and 69 Staph. haemolyticus strains were isolated, and none of these caused infections in more than 2 different quarters. The 3 most dominant strains of Strep. dysgalactiae (7 strains) and Strep. uberis (18 strains) caused 81% of 33 and 49% of 37 infections in total, respectively. The estimated median infection duration for Staph. aureus was 80 d, and that for Staph. epidermidis and Staph. haemolyticus was 28 and 22 d, respectively. The probability of remaining infected with Strep. dysgalactiae or Strep. uberis for more than 84 and 70 d was 58.7 and 53.5%, respectively. Staphylococcus epidermidis and Staph. haemolyticus were not transmitted contagiously and the average infection durations were short, which brings into question whether antimicrobial treatment of intramammary infections with these organisms is justified. In contrast, infections with the other 3 pathogens lasted longer and largely originated from contagious transmission.
To design cost-effective prevention strategies against mastitis in dairy cow farms, knowledge about infection pathways of causative pathogens is necessary. Therefore, we investigated the reservoirs of bacterial strains causing intramammary infections in one dairy cow herd. Quarter foremilk samples (n = 8056) and milking- and housing-related samples (n = 251; from drinking troughs, bedding material, walking areas, cow brushes, fly traps, milking liners, and milker gloves), were collected and examined using culture-based methods. Species were identified with MALDI-TOF MS, and selected Staphylococcus and Streptococcus spp. typed with randomly amplified polymorphic DNA-PCR. Staphylococci were isolated from all and streptococci from most investigated locations. However, only for Staphylococcus aureus, matching strain types (n = 2) were isolated from milk and milking-related samples (milking liners and milker gloves). Staphylococcus epidermidis and Staphylococcus haemolyticus showed a large genetic diversity without any matches of strain types from milk and other samples. Streptococcus uberis was the only Streptococcus spp. isolated from milk and milking- or housing-related samples. However, no matching strains were found. This study underlines the importance of measures preventing the spread of Staphylococcus aureus between quarters during milking.
Antimicrobials are widely used to cure intramammary infections (IMI) in dairy cows during the dry period (DP). Nevertheless, the IMI cure is influenced by many factors and not all quarters benefit from antimicrobial dry cow treatment (DCT). To evaluate the true effect of antibiotic DCT compared to self-cure and the role of causative pathogens on the IMI cure, a retrospective cross-sectional study was performed. The analysis included 2987 quarters infected at dry-off (DO). Information on DCT, causative pathogens, somatic cell count, milk yield, amount of lactation, Body Condition Score, and season and year of DO were combined into categorical variables. A generalized linear mixed model with a random cow, farm and year effect and the binary outcome of bacteriological cure of IMI during the DP was conducted. In the final model, a significant effect (p < 0.05) on DP cure was seen for the DO season and the category of causative pathogens (categories being: Staphylococcus aureus, non-aureus staphylococci, streptococci, coliforms, ‘other Gram-negative bacteria’, ‘other Gram positive bacteria’, non-bacterial infections and mixed infections), while antibiotic DCT (vs. non-antibiotic DCT) only showed a significant effect in combination with the pathogen categories streptococci and ‘other Gram-positive bacteria’.
During machine milking, pathogenic microorganisms can be transmitted from cow to cow through liners. Therefore, in Germany, a spray method for the intermediate disinfection of the milking cluster is often used for prevention. This method of cluster disinfection is easy to perform, requires little time and no extra materials, and the disinfection solution is safe from outside contamination in the spray bottle. Since no data on a systematic efficacy trial are available, the aim of this study was to determine the microbial reduction effect of intermediate disinfection. Therefore, laboratory and field trials were conducted. In both trials, two sprays of 0.85 mL per burst of different disinfectant solutions were sprayed into the contaminated liners. For sampling, a quantitative swabbing method using a modified wet–dry swab (WDS) technique based on DIN 10113-1: 1997-07 was applied. Thus, the effectiveness of disinfectants based on Peracetic Acid, Hydrogen Peroxide and Plasma-Activated Buffered Solution (PABS) was compared. In the laboratory trial, the inner surfaces of liners were contaminated with pure cultures of Escherichia (E.) coli, Staphylococcus (S.) aureus, Streptococcus (Sc.) uberis and Sc. agalactiae. The disinfection of the contaminated liners with the disinfectants resulted in a significant reduction in bacteria with values averaging 1 log for E. coli, 0.7 log for S. aureus, 0.7 log for Sc. uberis and 0.8 log for Sc. agalactiae. The highest reduction was obtained for contamination with E. coli (1.3 log) and Sc. uberis (0.8 log) when PABS was applied and for contamination with S. aureus (1.1 log) and Sc. agalactiae (1 log) when Peracetic Acid Solution (PAS) was used. Treatment with sterile water only led to an average reduction of 0.4 log. In the field trial, after the milking of 575 cows, the liners were disinfected and the total microorganism count from the liner surface was performed. The reduction was measured against an untreated liner within the cluster. Although a reduction in microorganisms was achieved in the field trial, it was not significant. When using PAS, a log reduction of 0.3 was achieved; when using PABS, a log reduction of 0.2 was obtained. The difference between the two disinfection methods was also not significant. Treatment with sterile water only led to a reduction of 0.1 log. The results show that spray disinfection under these circumstances does result in a reduction in the bacteria on the milking liner surface, but for effective disinfection a higher reduction would be preferred.
We present a methodology based on mixed-integer nonlinear model predictive control for a real-time building energy management system in application to a single-family house with a combined heat and power (CHP) unit. The developed strategy successfully deals with the switching behavior of the system components as well as minimum admissible operating time constraints by use of a special switch-cost-aware rounding procedure. The quality of the presented solution is evaluated in comparison to the globally optimal dynamic programming method and conventional rule-based control strategy. Based on a real-world scenario, we show that our approach is more than real-time capable while maintaining high correspondence with the globally optimal solution. We achieve an average optimality gap of 2.5% compared to 20% for a conventional control approach, and are faster and more scalable than a dynamic programming approach.
Subclinical mastitis in heifers during early lactation affects udder health, future milk production and, therefore, the risk of premature culling. The aim of this cross-sectional study was to identify pre- and post-partum risk factors associated with a high heifer mastitis rate (HMR), and to find out which period (either pre- or post-partum) contains more risk factors and consequently should be the focus of mastitis control in heifers. A total of 77 herds were included in this study and the potential animal- and farm-related risk factors were recorded during a one-time farm visit. The HMR was provided by the dairy herd improvement test (DHI) as the annual average of the past 11 DHIs. For this study, data were analyzed in two models using generalized linear models. Each model examined the association between possible risk factors and HMR, one including only prepartum risk factors and the other one only post-partum risk factors. One identified pre-partum risk factor was the proportion of udder-healthy cows in the herd. Post-partum risk factors were the type of teat cleaning procedure before milking, teat disinfection, treatment of mastitis in heifers, a body condition score (BCS) of >3.0 in fresh heifers, and the combination of a teat cleaning procedure with a teat disinfectant. The results show the importance of the period shortly after calving for udder health in heifers, as four of the five significant risk factors were identified in this period and three of them were related to the milking process. However, further research with a higher number of herds is needed to minimize individual herd effects.
Recent research efforts have highlighted the potential of hybrid composites in the context of additive manufacturing. The use of hybrid composites can lead to an enhanced adaptability of the mechanical properties to the specific loading case. Furthermore, the hybridization of multiple fiber materials can result in positive hybrid effects such as increased stiffness or strength. In contrast to the literature, where only the interply and intrayarn approach has been experimentally validated, this study presents a new intraply approach, which is experimentally and numerically investigated. Three different types of tensile specimens were tested. The non-hybrid tensile specimens were reinforced with contour-based fiber strands of carbon and glass. In addition, hybrid tensile specimens were manufactured using an intraply approach with alternating carbon and glass fiber strands in a layer plane. In addition to experimental testing, a finite element model was developed to better understand the failure modes of the hybrid and non-hybrid specimens. The failure was estimated using the Hashin and Tsai–Wu failure criteria. The specimens showed similar strengths but greatly different stiffnesses based on the experimental results. The hybrid specimens demonstrated a significant positive hybrid effect in terms of stiffness. Using FEA, the failure load and fracture locations of the specimens were determined with good accuracy. Microstructural investigations of the fracture surfaces showed notable evidence of delamination between the different fiber strands of the hybrid specimens. In addition to delamination, strong debonding was particularly evident in all specimen types.
The optimization of lubricated sealing systems with respect to the stick-slip effect requires a friction model that describes the complex friction behavior in the lubricated contact area. This paper presents an efficient dynamic friction model based on the Stribeck curve, which allows to investigate the influencing parameters through finite element (FE) simulations. The simulation of a tribometer test using this friction model proofs that the model correlates well with the tribometer test results. It is shown that the system stiffness has a significant influence on the stick-slip tendency of the system.
Although Corynebacterium spp. can be regularly associated with subclinical and clinical mastitis cases in dairy cows, knowledge on their reservoirs in dairy farms is sparse. Therefore, samples were collected at 10 visits with 14 day intervals from bedding material (n = 50), drinking troughs (n = 20), different walking areas (n = 60), cow brushes (n = 8), fly traps (n = 4), the passage to pasture (n = 9) as well as milking liners (n = 80) and milker gloves (n = 20) in one dairy cow farm. Additionally, quarter foremilk samples from all lactating cows (approximately 200) were collected at each visit. All samples underwent microbiological examination and cultured isolates were identified using MALDI-TOF MS. Most Corynebacterium spp. that were cultivated from milk were also isolated from the housing environment and milking-related niches (C. amycolatum, C. confusum, C. stationis, C. variabile, C. xerosis) or from milking-related niches only (C. frankenforstense, C. pilosum, C. suicordis). C. bovis was not cultivated from any environmental niche, while being the dominant species in milk samples. This study demonstrates that many Corynebacterium spp. present in milk samples can also be isolated from the cows’ environment. For C. bovis, the most relevant Corynebacterium species with regard to intramammary infections, it indicates that environmental reservoirs are of little relevance.
We report velocity-dependent internal energy distributions of nitric oxide molecules, NO, scattered off graphene supported on gold to further explore the dynamics of the collision process between NO radicals and graphene. These experiments were performed by directing a molecular beam of NO onto graphene in a surface-velocity map imaging setup, which allowed us to record internal energy distributions of the NO radicals as a function of their velocity. We do not observe bond formation but (1) major contributions from direct inelastic scattering and (2) a smaller trapping–desorption component where some physisorbed NO molecules have residence times on the order of microseconds. This is in agreement with our classical molecular dynamics simulations which also observe a small proportion of two- and multi-bounce collisions events but likewise a small proportion of NO radicals trapped at the surface for the entire length of the molecular dynamics simulations (a few picoseconds). Despite a collision energy of 0.31 eV, which would be sufficient to populate NO(v = 1), we do not detect vibrationally excited nitric oxide.
This paper proposes an extended Petri net formalism as a suitable language for composing optimal scheduling problems of industrial production processes with real and binary decision variables. The proposed approach is modular and scalable, as the overall process dynamics and constraints can be collected by parsing of all atomic elements of the net graph. To conclude, we demonstrate the use of this framework for modeling the moulding sand preparation process of a real foundry plant.
Coaxial Laser wire Direct Energy Deposition (L-DED) promises a direction-independent buildup due to a centric supply of the welding material. To fabricate Functionally Graded Materials (FGMs), a processing head was designed that is capable of supplying two wire materials into the processing zone. This study investigates the direction dependency of welding seams produced by two 1.4718 metal wires with a diameter of 0.8 mm in a coaxial laser setup using three separately controllable single laser beams with a maximum combined laser power of 660 W. The welding wires are supplied simultaneously to the laser spot under an incidence angle of 3.5° to the middle axis of the processing head. The seam geometry is investigated using a confocal laserscanning-microscope. A comparison of the height, width and macroscopic seam geometry reveals the influence of the welding direction on the seam geometry and quality in Laser Double wire Direct Energy Deposition (LD-DED).
A proven method to enhance the mechanical properties of additively manufactured plastic parts is the embedding of continuous fibers. Due to its great flexibility, continuous fiber-reinforced material extrusion allows fiber strands to be deposited along optimized paths. Nevertheless, the fibers have so far been embedded in the parts contour-based or on the basis of regular patterns. The outstanding strength and stiffness properties of the fibers in the longitudinal direction cannot be optimally utilized. Therefore, a method is proposed which allows to embed fibers along the principal stresses into the parts in a load-oriented manner. A G-code is generated from the calculated principal stress trajectories and the part geometry, which also takes into account the specific restrictions of the manufacturing technology used. A distinction is made between fiber paths and the matrix so that the average fiber volume content can be set in a defined way. To determine the mechanical properties, tensile and flexural tests are carried out on specimens consisting of carbon fiber-reinforced polyamide. In order to increase the influence of the principal stress-based fiber orientation, open-hole plates are used for the tensile tests, as this leads to variable stresses across the cross section. In addition, a digital image correlation system is used to determine the deformations during the mechanical tests. It was found that the peak load of the optimized open-hole plates was greater by a factor of 3 and the optimized flexural specimens by a factor of 1.9 than the comparison specimens with unidirectional fiber alignment.
We performed classical molecular dynamics simulations to model the scattering process of nitric oxide, NO, off graphene supported on gold. This is motivated by our desire to probe the energy transfer in collisions with graphene. Since many of these collision systems comprising of graphene and small molecules have been shown to scatter non-reactively, classical molecular dynamics appear to describe such systems sufficiently. We directed thousands of trajectories of NO molecules onto graphene along the surface normal, while varying impact position, but also speed, orientation, and rotational excitation of the nitric oxide, and compare the results with experimental data. While experiment and theory do not match quantitatively, we observe agreement that the relative amount of kineti cenergy lost during the collision increases with increasing initial kinetic energy of the NO. Furthermore, while at higher collision energies, all NO molecules lose some energy, and the vast majority of NO is scattered back, in contrast at low impact energies, the fraction of those nitric oxide molecules that are trapped at the surface increases, and some NO molecules even gain some kinetic energy during the collision process. The collision energy seems to preferentially go into the collective motion of the carbon atoms in the graphene sheet.
As part of the European Network for Optimization of Veterinary Antimicrobial Treatment (ENOVAT), a webinar on the topic “Mastitis Treatment in Lactation” was held, in which eight mastitis experts from different European countries (Spain, The Netherlands, Estonia, Ireland, Poland, Finland, Germany, and Italy) presented their treatment approaches for clinical mastitis in lactation. The aim of this study was to compare the therapeutic approaches to identify commonalities and differences. In all eight participating countries, the decision to start treatment is usually made by the veterinarians, while the farm personnel are responsible for treatment administration. Antibiotic treatment is then typically administered intramammarily. The treatment duration often depends on the label instructions and is frequently extended if Staphylococcus aureus or Streptococcus uberis is involved. Administering supportive therapy, especially non-steroidal anti-inflammatory drugs (NSAIDs) is an established practice in all countries. Penicillin is the first-choice drug for the treatment of mastitis in an increasing number of countries. The use of critically important antimicrobials (CIAs) such as quinolones and third- and fourth-generation cephalosporins is at a low level in Finland and The Netherlands. In Estonia, Germany, Italy, and Spain, the use of CIAs is declining and is only allowed if milk samples are analyzed in advance following the legal framework. Systems for monitoring antibiotic use are being introduced in more and more countries. This exchange of different views will help the European countries to move towards a common high standard of antimicrobial stewardship in veterinary medicine.
Severe mastitis can lead to considerable disturbances in the cows’ general condition and even to septicemia and death. The aim of this cross-sectional study was to identify factors associated with the severity of the clinical expression of mastitis. Streptococcus (Str.) uberis (29.9%) was the most frequently isolated pathogen, followed by coliform bacteria (22.3%). The majority of all mastitis cases (n = 854) in this study were either mild or moderate, but 21.1% were severe. It can be deduced that the combination of coliform pathogens and increasing pathogen shedding of these showed associations with severe mastitis. Furthermore, animal-related factors associated with severe disease progression were stages of lactation, and previous diseases in the period prior to the mastitis episode. Cows in early lactation had more severe mastitis. Ketosis and uterine diseases in temporal relation to the mastitis were associated with more severe mastitis in the diseased cows. Hypocalcemia was significantly associated with milder mastitis. As another factor, treatment with corticosteroids within two weeks before mastitis was associated with higher severity of mastitis. Knowledge of these risk factors may provide the basis for randomized controlled trials of the exact influence of these on the severity of mastitis.
Continuous Fiber-Reinforced Material Extrusion with Hybrid Composites of Carbon and Aramid Fibers
(2022)
An existing challenge in the use of continuous fiber reinforcements in additively manufactured parts is the limited availability of suitable fiber materials. This leads to a reduced adaptability of the mechanical properties to the load case. The increased design freedom of additive manufacturing allows the flexible deposition of fiber strands at defined positions, so that even different fiber materials can be easily combined in a printed part. In this work, therefore, an approach is taken to combine carbon and aramid fibers in printed composite parts to investigate their effects on mechanical properties. For this purpose, tensile, flexural and impact tests were performed on printed composite parts made of carbon and aramid fibers in a nylon matrix with five different mixing ratios. The tests showed that the use of hybrid composites for additive manufacturing is a reasonable approach to adapt the mechanical properties to the loading case at hand. The experiments showed that increasing the aramid fiber content resulted in an increase in impact strength, but a decrease in tensile and flexural strength and a decrease in stiffness. Microstructural investigations of the fracture surfaces showed that debonding and delamination were the main failure mechanisms. Finally, Rule of Hybrid Mixture equations were applied to predict the mechanical properties at different mixture ratios. This resulted in predicted values that differed from the experimentally determined values by an average of 5.6%.
Corynebacterium spp. are frequently detected in bovine quarter milk samples, yet their impact on udder health has not been determined completely. In this longitudinal study, we collected quarter milk samples from a dairy herd of approximately 200 cows, ten times at 14 d intervals. Bacteriologically, Catalase-positive and Gram-positive rods were detected in 22.7% of the samples. For further species diagnosis, colonies were analyzed by MALDITOF MS. Corynebacterium bovis, C. amycolatum, C. xerosis and 10 other Corynebacterium spp. were detected. The three aforementioned species accounted for 88.4%, 8.65% and 0.94% of all cultured Corynebacterium spp., respectively. For further evaluation of infection dynamics, the following three infection definitions were applied: A (2/3 consecutive samples positive for the same species), B (≥1000 cfu/mL in one sample), C (isolated from a clinical mastitis case). Infections according to definition B occurred most frequently and clinical mastitis with Corynebacterium spp. occurred once during sampling. Life tables were used to determine the duration of infection. According to infection definition A, infection durations of 111 d and 98 d were obtained for C. bovis and C. amycolatum, respectively. Exemplarily, longer lasting infections were examined for their strain diversity by RAPD PCR. A low strain diversity was found in the individual quarters that indicates a longer colonization of the udder parenchyma by C. bovis and C. amycolatum.
We describe an experimental approach to the determination of the nascent internal state distribution of gas-phase products of a gas–liquid interfacial reaction. The system chosen for study is O(³P) atoms with the surface of liquid deuterated squalane, a partially branched long-chain saturated hydrocarbon, C₃₀D₆₂. The nascent OD products are detected by laser-induced fluorescence. Both OD (v′=0) and (v′=1) were observed in significant yield. The rotational distributions in both vibrational levels are essentially the same, and are characteristic of a Boltzmann distribution at a temperature close to that of the liquid surface. This contrasts with the distributions in the corresponding homogeneous gas-phase reactions. We propose a preliminary interpretation in terms of a dominant trapping-desorption mechanism, in which the OD molecules are retained at the surface sufficiently long to cause rotational equilibration but not complete vibrational relaxation. The significant yield of vibrationally excited OD also suggests that the surface is not composed entirely of –CD₃ endgroups, but that secondary and/or tertiary units along the backbone are exposed.
Energy- and angle-resolved photofragment distributions for ground-state Cl (²P₃/₂) and spin–orbit excited Cl* (²P₁/₂) have been recorded using the velocity map imaging technique after photodissociation of chloroform at wavelengths of 193 and ∼235 nm. Translational energy distributions are rather broad and peak between 0.6 and 1.0 eV. The spin–orbit branching ratios [Cl*]/[Cl] are 1 and 0.3 at 193 and 235 nm, respectively, indicating the involvement of two or more excited state surfaces. Considering the anisotropy parameters and branching ratios collectively, we conclude that the reaction at 193 nm takes place predominantly on the ¹Q₁ surface, while the ³Q₁ surface gains importance at lower dissociation energies around 235 nm.
We have combined the velocity map imaging technique with time-of-flight measurements to study the surface photochemistry of KBr single crystals. This approach yields 3-dimensional velocity distributions of Br atoms resulting from 193 nm photodesorption. The velocity distributions indicate that at least two non-thermal mechanisms contribute to the photodesorption dynamics. Our experimental geometry also allows us to measure the Br(²P₃⁄₂):Br(²P₁⁄₂) branching ratio, which is found to be 24:1.
The effects of surface temperature on the gas-liquid interfacial reaction dynamics of O(³P)+squalane
(2005)
OH/OD product state distributions arising from the reaction of gas-phase O(³P) atoms at the surface of the liquid hydrocarbon squalane C₃₀H₆₂/C₃₀D₆₂ have been measured. The O(³P) atoms were generated by 355 nm laser photolysis of NO₂ at a low pressure above the continually refreshed liquid. It has been shown unambiguously that the hydroxyl radicals detected by laser-induced fluorescence originate from the squalane surface. The gas-phase OH/OD rotational populations are found to be partially sensitive to the liquid temperature, but do not adapt to it completely. In addition, rotational temperatures for OH/OD(v′=1) are consistently colder (by 34±5 K) than those for OH/OD(v′=0). This is reminiscent of, but less pronounced than, a similar effect in the well-studied homogeneous gas-phase reaction of O(³P) with smaller hydrocarbons. We conclude that the rotational distributions are composed of two different components. One originates from a direct abstraction mechanism with product characteristics similar to those in the gas phase. The other is a trapping-desorption process yielding a thermal, Boltzmann-like distribution close to the surface temperature. This conclusion is consistent with that reached previously from independent measurements of OH product velocity distributions in complementary molecular-beam scattering experiments. It is further supported by the temporal profiles of OH/OD laser-induced fluorescence signals as a function of distance from the surface observed in the current experiments. The vibrational branching ratios for (v′=1)/(v′=0) for OH and OD have been found to be (0.07±0.02) and (0.30±0.10), respectively. The detection of vibrationally excited hydroxyl radicals suggests that secondary and/or tertiary hydrogen atoms may be accessible to the attacking oxygen atoms.
The authors describe the application of a combination of velocity map imaging and time-of-flight (TOF) techniques to obtain three-dimensional velocity distributions for surface photodesorption. They have established a systematic alignment procedure to achieve correct and reproducible experimental conditions. It includes four steps: (1) optimization of the velocity map imaging ion optics’ voltages to achieve optimum velocity map imaging conditions; (2) alignment of the surface normal with the symmetry axis (ion flight axis) of the ion optics; (3) determination of TOF distance between the surface and the ionizing laser beam; (4) alignment of the position of the ionizing laser beam with respect to the ion optics. They applied this set of alignment procedures and then measured Br(²P₃/₂) (Br) and Br(²P₁/₂) (Br∗) atoms photodesorbing from a single crystal of KBr after exposure to 193 nm light. They analyzed the velocity flux and energy flux distributions for motion normal to the surface. The Br∗ normal energy distribution shows two clearly resolved peaks at approximately 0.017 and 0.39 eV, respectively. The former is slightly faster than expected for thermal desorption at the surface temperature and the latter is hyperthermal. The Br normal energy distribution shows a single broad peak that is likely composed of two hyperthermal components. The capability that surface three-dimensional velocity map imaging provides for measuring state-specific velocity distributions in all three dimensions separately and simultaneously for the products of surface photodesorption or surface reactions holds great promise to contribute to our understanding of these processes.
Recent progress that has been made towards understanding the dynamics of collisions at the gas–liquid interface is summarized briefly. We describe in this context a promising new approach to the experimental study of gas–liquid interfacial reactions that we have introduced. This is based on laser-photolytic production of reactive gas-phase atoms above the liquid surface and laser-spectroscopic probing of the resulting nascent products. This technique is illustrated for reaction of O(³P) atoms at the surface of the long-chain liquid hydrocarbon squalane (2,6,10,15,19,23-hexamethyltetracosane). Laser-induced fluorescence detection of the nascent OH has revealed mechanistically diagnostic correlations between its internal and translational energy distributions. Vibrationally excited OH molecules are able to escape the surface. At least two contributions to the product rotational distributions are identified, confirming and extending previous hypotheses of the participation of both direct and trapping-desorption mechanisms. We speculate briefly on future experimental and theoretical developments that might be necessary to address the many currently unanswered mechanistic questions for this, and other, classes of gas–liquid interfacial reaction.
Background: This basically anatomical study focuses on two items; firstly, the establishment of a system for the cartographic subdivision of the neopallium; secondly, the topographical correlation of extracranial landmarks and intracranial sites on the neopallium.
Materials and methods: The surface of the neopallium was subdivided into 15 sectors with reference to a newly introduced pattern of Primary Sulci. The topographical link between extracranial landmarks and certain intracranial sites (i.e. neopallium sectors) was elaborated by using a simple stereotactic device and a computer-assisted measurement device. Measurements were performed between points on the head's outer surface and on the isolated brain.
Results and Conclusions: The introduction of an anatomical three-dimensional coordinate system was an essential key issue for this investigation. This setting facilitated the measurements and calculations of the so-called indirect distances that were characterised by their alignment along the three orthogonal axes (x, y, z) of the anatomical coordinate system. The inter-individual comparison (16 adult horses [Equus caballus]) of the indirect distances revealed that each sector centre lay within a distinct morphometric residence area. The measured and calculated data also showed that each sector centre could be assigned to its proper extracranial landmark that - in comparison with other landmarks - was best suited for the optimal allocation of the sector centre point.
Molecular hydrogen production from amorphous solid water during low energy electron irradiation
(2017)
This work investigates the production of molecular hydrogen isotopologues (H2, HD, and D2) during low energy electron irradiation of layered and isotopically labelled thin films of amorphous solid water (ASW) in ultrahigh vacuum. Experimentally, the production of these molecules with both irradiation time and incident electron energy in the range 400 to 500 eV is reported as a function of the depth of a buried D2O layer in an H2O film. H2 is produced consistently in all measurements, reflecting the H2O component of the film, though it does exhibit a modest reduction in intensity at the time corresponding to product escape from the buried D2O layer. In contrast, HD and D2 production exhibit peaks at times corresponding to product escape from the buried D2O layer in the composite film. These features broaden the deeper the HD or D2 is formed due to diffusion. A simple random-walk model is presented that can qualitatively explain the appearance profile of these peaks as a function of the incident electron penetration.
Surface atomic relaxation and magnetism on hydrogen-adsorbed Fe(110) surfaces from first principles
(2016)
We have computed adsorption energies, vibrational frequencies, surface relaxation and buckling for hydrogen adsorbed on a body-centred-cubic Fe(110) surface as a function of the degree of H coverage. This adsorption system is important in a variety of technological processes such as the hydrogen embrittlement in ferritic steels, which motivated this work, and the Haber–Bosch process. We employed spin-polarised density functional theory to optimise geometries of a six-layer Fe slab, followed by frozen mode finite displacement phonon calculations to compute Fe–H vibrational frequencies. We have found that the quasi-threefold (3f) site is the most stable adsorption site, with adsorption energies of ∼3.0 eV/H for all coverages studied. The long-bridge (lb) site, which is close in energy to the 3f site, is actually a transition state leading to the stable 3f site. The calculated harmonic vibrational frequencies collectively span from 730 to 1220 cm−1, for a range of coverages. The increased first-to-second layer spacing in the presence of adsorbed hydrogen, and the pronounced buckling observed in the Fe surface layer, may facilitate the diffusion of hydrogen atoms into the bulk, and therefore impact the early stages of hydrogen embrittlement in steels.
The velocity distribution of He atoms evaporating from a slab of liquid dodecane has been simulated. The distribution composed of ∼10 000 He trajectories is shifted to fractionally faster velocities as compared to a Maxwell–Boltzmann distribution at the temperature of the liquid dodecane with an average translational energy of 1.05 × 2RT (or 1.08 × 2RT after correction for a cylindrical liquid jet), compared to the experimental work by Nathanson and co-workers (1.14 × 2RT) on liquid jets. Analysis of the trajectories allows us to infer mechanistic information about the modes of evaporation, and their contribution to the overall velocity distribution.
A novel method has been implemented to prepare metal oxide nanopowders covered with known quantities of adsorbed water; we subsequently studied the γ-radiolysis of ZrO2 nanopowders covered with H2O layers. H2 yields from the adsorbed water radiolysis are of importance in multiple industrial contexts – the nuclear industry being a prime example. Measured H2 yields at water coverages of just below and above one monolayer are around 350 times greater than for neat water, but these yields decrease rapidly with increasing water loading of the ZrO2 nanoparticles, approaching the yield of bulk water at coverages of tens of water layers. The observed plateau of the yields at 0.5 to 2.0 monolayers coverage can be explained by the ease with which electronic excitations in the ZrO2 can be transferred across the interface to the first one or two adsorbed water layers. However, with increasing water loading, energy transfer to water layers further away from the interface becomes less efficient, and above ~30 water layers, most of the water is not affected by any exciton formation in the ZrO2.
This study is concerned with the early stages of hydrogen embrittlement on an atomistic scale. We employed density functional theory to investigate hydrogen diffusion through the (100), (110) and (111) surfaces of γ-Fe. The preferred adsorption sites and respective energies for hydrogen adsorption were established for each plane, as well as a minimum energy pathway for diffusion. The H atoms adsorb on the (100), (110) and (111) surfaces with energies of ∼4.06 eV, ∼3.92 eV and ∼4.05 eV, respectively. The barriers for bulk-like diffusion for the (100), (110) and (111) surfaces are ∼0.6 eV, ∼0.5 eV and ∼0.7 eV, respectively. We compared these calculated barriers with previously obtained experimental data in an Arrhenius plot, which indicates good agreement between experimentally measured and theoretically predicted activation energies. Texturing austenitic steels such that the (111) surfaces of grains are preferentially exposed at the cleavage planes may be a possibility to reduce hydrogen embrittlement.
The adsorption of O atoms on the Fe(1 1 0) surface has been investigated by density functional theory for increasing degrees of oxygen coverage from 0.25 to 1 monolayer, to follow the evolution of the Osingle bondFe(1 1 0) system into an FeO(1 1 1)-like monolayer. We found that the quasi-threefold site is the most stable adsorption site for all coverages, with adsorption energies of ∼2.8–4.0 eV per O atom. Oxygen adsorption results in surface geometrical changes such as interlayer relaxation and buckling, the latter of which decreases with coverage. The calculated vibrational frequencies range from 265 to 470 cm−1 for the frustrated translational modes and 480–620 cm−1 for the stretching mode, and hence are in good agreement with the experimental values reported for bulk FeO wüstite. The hybridization of the oxygen 2p and iron 3d orbitals increases with oxygen coverage, and the partial density of states for the Osingle bondFe(1 1 0) system at full coverage resembles the one reported in the literature for bulk FeO. These results at full oxygen coverage point to the incipient formation of an FeO(1 1 1)-like monolayer that would eventually lead to the bulk FeO oxide layer.
The effect of magnetism on hydrogen adsorption and subsurface diffusion through face-centred cubic (fcc) γ-Fe(0 0 1) was investigated using spin-polarised density functional theory (s-DFT). The non-magnetic (NM), ferromagnetic (FM), and antiferromagnetic single (AFM1) and double layer (AFMD) structures were considered. For each magnetic state, the hydrogen preferentially adsorbs at the fourfold site, with adsorption energies of 4.07, 4.12, 4.03 and 4.05 eV/H atom for the NM, FM, AFM1 and AFMD structures. A total barrier of 1.34, 0.90, 1.32 and 1.25 eV and a bulk-like diffusion barrier of 0.6, 0.2, 0.4 and 0.3 eV were calculated for the NM, FM, AFM1 and AFMD magnetic states. The Fe atoms nearest to the H atom exhibited a reduced magnetic moment, whereas the next-nearest neighbour Fe atoms exhibited a non-negligible local perturbation in the magnetic moment. The presence of magnetically ordered structures has a minimal influence on the minimum energy path for H diffusion through the lattice and on the adsorption of H atoms on the Fe(0 0 1) surface, but we computed a significant reduction of the bulk-like diffusion barriers with respect to the non-magnetic state of fcc γ-Fe.
Nitric oxide adsorption on a Au(100) single crystal has been investigated to identify the type of adsorption, the adsorption site, and the orientation and alignment of the adsorbed NO relative to the surface. This was done using a combination of 3D-surface velocity map imaging, near-ambient pressure X-ray photoelectron spectroscopy, and density functional theory. NO was observed to be molecularly adsorbed on gold at ~200 K. Very narrow angular distributions and cold rotational distributions of photodesorbed NO indicate that NO adsorbs on high-symmetry sites on the Au crystal, with the N–O bond axis close to the surface normal. Our density functional theory calculations show that NO preferentially adsorbs on the symmetric bridge (2f) site, which ensures efficient overlap of the NO π* orbital with the orbitals on the two neighbouring Au atoms, and with the N–O bond axis aligned along the surface normal, in agreement with our conclusions from the rotational state distributions. The combination of XPS, which reveals the orientation of NO on gold, with 3D-surface velocity map imaging and density functional theory thus allowed us to determine the adsorption site, orientation and alignment of nitric oxide adsorbed on Au(100).
The reactivity of graphene at its boundary region has been imaged using non-linear spectroscopy to address the controversy whether the terraces of graphene or its edges are more reactive. Graphene was functionalised with phenyl groups, and we subsequently scanned our vibrational sum-frequency generation setup from the functionalised graphene terraces across the edges. A greater phenyl signal is clearly observed at the edges, showing evidence of increased reactivity in the boundary region. We estimate an upper limit of 1 mm for the width of the CVD graphene boundary region.
The use of vibrational sum-frequency spectroscopy (VSFS) to study transferred graphene, produced by chemical vapour deposition, is presented. The VSF spectrum shows a clear CeH stretching mode at ~2924 cm⁻¹, which is attributed to residue of the polymer used for the transfer. This makes VSFS a powerful tool to identify adsorbates and contaminants affecting the properties of graphene.
We report the unambiguous detection of phenyl groups covalently attached to functionalised graphene using non-linear spectroscopy. Sum-frequency generation was employed to probe graphene on a gold surface after chemical functionalisation using a benzene diazonium salt. We observe a distinct resonance at 3064 cm1 which can clearly be assigned to an aromatic C–H stretch by comparison with a self-assembled monolayer on a gold substrate formed from benzenethiol. Not only does sum-frequency generation spectroscopy allow one to characterise functionalised graphene with higher sensitivity and much better specificity than many other spectroscopic techniques, but it also opens up the possibility to assess the coverage of graphene with functional groups, and to determine their orientation relative to the graphene surface.
The ability to functionalize graphene with several methods, such as radical reactions, cycloadditions, hydrogenation, and oxidations, allows this material to be used in a large range of applications. In this framework, it is essential to be able to control the efficiency and stability of the functionalization process—this requires understanding how the graphene reactivity is affected by the environment, including the substrate. In this work we provide an insight on the substrate dependence of graphene reactivity towards hydrogenation by comparing three different substrates: silicon, hexagonal boron nitride (h-BN), and molybdenum disulfide (MoS2). Although MoS2 and h-BN have flatter surfaces than silicon, we found that the H coverage of graphene on h-BN is about half of the H coverage on graphene on both silicon and MoS2. Therefore, graphene shows strongly reduced reactivity towards hydrogenation when placed on h-BN. The difference in hydrogenation reactivity between h-BN and MoS2 may indicate a stronger van der Waals force between graphene and h-BN, compared to MoS2, or may be related to the chemical properties of MoS2, which is a well-known catalyst for hydrogen evolution reactions.
In this study, we calculated the energetics of hydrogen atoms adsorbing on and diffusing into the first few layers of γ-Fe for the (100), (110) and (111) surfaces and for the non-magnetic (NM), ferromagnetic (FM), and antiferromagnetic single (AFM1) and double layer (AFMD) structures. These studies are relevant as they atomistically simulate the early stages of hydrogen embrittlement in steels. We employed density functional theory to establish adsorption sites and energies for each plane and the minimum energy pathways for diffusion through the first few layers with associated activation barriers. Adsorption energies for all cases vary between ∼3.7 and 4.4 eV, and the energy barriers to diffusion in the bulk region vary between ∼0.2 and 1.2 eV for the twelve cases, with the highest and lowest bulk diffusion barriers occurring in the NM(111) and the FM(100) case, respectively. We conclude that the texturing of steels in order to expose certain cleavage planes or magnetic structures can decrease the likelihood of hydrogen embrittlement.
Electrospinning with consequent thermal treatment consists in a carbon fiber production method that spins a polymer solution to create fibers with diameters around a few hundred nanometers. The thermal treatments are used for the cyclization and then carbonization of the material at 1700 °C for one hour. The unique structure of micro- and nano-carbon fibers makes them a promising material for various applications ranging from future battery designs to filtration. This work investigated the possibility of using milled gasification biochar, derived from a 20 kW fixed-bed gasifier fueled with vine pruning pellets, as an addictive in the preparation of electrospinning solutions. This study outlined that solvent cleaning and the consequent wet-milling and 32 µm sifting are fundamental passages for biochar preparation. Four different polyacrylonitrile-biochar shares were tested ranging from pure polymer to 50–50% solutions. The resulting fibers were analyzed via scanning electron microscopy, and energy-dispersive X-ray and infrared spectroscopy. Results from the morphological analysis showed that biochar grains dispersed themselves well among the fiber mat in all the proposed shares. All the tested solutions, once carbonized, exceeded 97%wt. of carbon content. At higher carbonization temperatures, the inorganic compounds naturally showing in biochar such as potassium and calcium disappeared, resulting in an almost carbon-pure fiber matrix with biochar grains in between.
Milk concentrates are used in the manufacturing of dairy products such as yogurt and cheese or are processed into milk powder. Processes for the nonthermal separation of water and valuable milk ingredients are becoming increasingly widespread at farm level. The technical barriers to using farm-manufactured milk concentrate in dairies are minimal, hence the suspicion that the practice of on-farm raw milk concentration is still fairly uncommon for economic reasons. This study, therefore, set out to investigate farmers’ potential willingness to adopt a raw milk concentration plant. The empirical analysis was based on discrete choice experiments with 75 German dairy farmers to identify preferences and the possible adoption of on-farm raw milk concentration. The results showed that, in particular, farmers who deemed the current milk price to be insufficient viewed on-farm concentration using membrane technology as an option for diversifying their milk sales. We found no indication that adoption would be impeded by a lack of trustworthy information on milk processing technologies or capital.
In a cross-sectional study, impact of management in dairy farms on calf mortality rates and prevalence of rotavirus and Cryptosporidium parvum in feces of calves was investigated. Sixty-two commercial dairy herds in Mecklenburg-Western Pomerania, Germany, were stratified selected in 2019. We performed in-person interviews and fecal specimens in samples of all-female calves of age 7 up to 21 days. Management data were documented on farm level. A Multiscreen Ag-ELISA was performed to determine rotavirus and Cryptosporidium parvum. Associations between two calf mortality rates, detection of C. parvum and rotavirus, and predictors were examined with GLM models. In farms with routine vaccination against respiratory diseases, 31-days mortality rate was 4.2% +/-1.26 compared to 7.6% +/-0.97 (p = 0.040) on non-vaccinating farms. Six-months mortality was lower in farms that continued feeding milk to calves during periods of diarrhea compared to farms that did not (6.9% +/-0.8 vs. 12.4% +/-2.3). In case of a routine shifting of calves from the calving box into calf boxes less C. parvum was detected compared to an individual moving of calves (33.3% +/-2.6 vs. 19.6% +/-5.3; p = 0.024). Our model confirms a positive association between occurrence of aqueous feces and frequency of detection of C. parvum (45.4% +/-23.6 vs. 21.4% +/-18.7; p < 0.001). Frequency of detection of rotavirus was lower in farms that reported a defined amount of applicated colostrum per calf than in farms that presented a range of colostrum instead of a defined amount. This study indicates the potential for mitigation of risk factors for mortality in calves.
To optimise udder health at the herd level, identifying incurable mastitis cases as well as providing an adequate therapy and culling strategy are necessary. Cows with clinical mastitis should be administered antibiotic medication if it is most likely to improve mammary cure. The somatic cell count (SCC) in milk of the monthly implemented Dairy Herd Improvement (DHI) test represents the most important tool to decide whether a cow has a promising mammary cure rate. Differential cell count (DCC) facilitates the specification of the immunological ability of defence, for example by characterising leukocyte subpopulations or cell viability. The aim of this study was to assess the DCC and cell viability in DHI milk samples regarding the cytological (CC) and bacteriological cure (BC) of the udder within a longitudinal study, thereby gaining a predictive evaluation of whether a clinical mastitis benefits from an antibiotic treatment or not. The cows enrolled in this study had an SCC above 200,000 cells/mL in the previous DHI test. Study 1 assessed the CC by reference to the SCC of two consecutive DHI tests and included 1010 milk samples: 28.4% of the mammary glands were classified as cytologically cured and 71.6% as uncured. The final mixed logistic regression model identified the total number of non-vital cells as a significant factor associated with CC. An increasing amount of non-vital cells was related to a lower individual ability for CC. Cows which were in the first or second lactation possessed a higher probability of CC than cows having a lactation number above two. If animals developed a clinical mastitis after flow cytometric investigation, the BC was examined in study 2 by analysing quarter foremilk samples microbiologically. Taking 48 milk samples, 81.3% of the mammary glands were classified as bacteriologically cured and 18.7% as uncured. The percentage of total non-vital cells tended to be lower for cows which were cured, but no significance could be observed. This study revealed that the investigation of the proportion of non-vital cells in DHI milk samples can enhance the prognosis of whether an antibiotic treatment of clinical mastitis might be promising or not. Prospectively, this tool may be integrated in the DHI tests to facilitate the decision between therapy or culling.
HOXA9 and MEIS1 are frequently upregulated in acute myeloid leukemia (AML), including those with MLL‐rearrangement. Because of their pivotal role in hemostasis, HOXA9 and MEIS1 appear non‐druggable. We, thus, interrogated gene expression data of pre‐leukemic (overexpressing Hoxa9) and leukemogenic (overexpressing Hoxa9 and Meis1; H9M) murine cell lines to identify cancer vulnerabilities. Through gene expression analysis and gene set enrichment analyses, we compiled a list of 15 candidates for functional validation. Using a novel lentiviral multiplexing approach, we selected and tested highly active sgRNAs to knockout candidate genes by CRISPR/Cas9, and subsequently identified a H9M cell growth dependency on the cytosolic phospholipase A2 (PLA2G4A). Similar results were obtained by shRNA‐mediated suppression of Pla2g4a. Remarkably, pharmacologic inhibition of PLA2G4A with arachidonyl trifluoromethyl ketone (AACOCF3) accelerated the loss of H9M cells in bulk cultures. Additionally, AACOCF3 treatment of H9M cells reduced colony numbers and colony sizes in methylcellulose. Moreover, AACOCF3 was highly active in human AML with MLL rearrangement, in which PLA2G4A was significantly higher expressed than in AML patients without MLL rearrangement, and is sufficient as an independent prognostic marker. Our work, thus, identifies PLA2G4A as a prognostic marker and potential therapeutic target for H9M‐dependent AML with MLL‐rearrangement.
Investigations on Transfer of Pathogens between Foster Cows and Calves during the Suckling Period
(2021)
To date, there have been few studies on the health effects of foster cow systems, including the transmission of mastitis-associated pathogens during suckling. The present study aimed to compare the pathogens detected in the mammary glands of the foster cow with those in the oral cavities of the associated foster calves and to evaluate the resulting consequences for udder health, calf health and internal biosecurity. Quarter milk sampling of 99 foster cows from an organic dairy farm was conducted twice during the foster period. Oral cavity swabs were taken from 345 foster calves. Furthermore, quarter milk samples were collected from 124 biological dams to investigate possible transmission to the foster cows via the suckling calves. All samples were microbiologically examined and confirmed by MALDI-TOF (matrix-assisted laser desorption time-offlight mass-spectrometry). Using RAPD-PCR (randomly amplified polymorphic DNA polymerase chain reaction), strain similarities were detected for Pasteurella multocida, Staphylococcus aureus, S. sciuri and Streptococcus (Sc.) suis. Transmission of P. multocida and S. aureus probably occurred during suckling. For S. sciuri and Sc. suis, environmental origins were assumed. Transmission from dam to foster cow with the suckling calf as vector could not be clearly demonstrated.
Worldwide, seagrass meadows are under threat. Consequently, there is a strong need for seagrass restoration to guarantee the provision of related ecosystem services such as nutrient cycling, carbon sequestration and habitat provision. Seagrass often grows in vast meadows in which the presence of seagrass itself leads to a reduction of hydrodynamic energy. By modifying the environment, seagrass thus serves as foundation species and ecosystem engineer improving habitat quality for itself and other species as well as positively affecting its own fitness. On the downside, this positive feedback mechanism can render natural recovery of vanished and destroyed seagrass meadows impossible. An innovative approach to promote positive feedback mechanisms in seagrass restoration is to create an artificial seagrass (ASG) that mimics the facilitation function of natural seagrass. ASG could provide a window of opportunity with respect to suitable hydrodynamic and light conditions as well as sediment stabilization to allow natural seagrass to re-establish. Here, we give an overview of challenges and open questions for the application of ASG to promote seagrass restoration based on experimental studies and restoration trials and we propose a general approach for the design of an ASG produced from biodegradable materials. Considering positive feedback mechanisms is crucial to support restoration attempts. ASG provides promising benefits when habitat conditions are too harsh for seagrass meadows to re-establish themselves.
In this species differentiation study of Corynebacterium spp. (C. spp.), quarter foremilk samples from 48 farms were included. These were obtained from both clinically healthy cows and those with clinical mastitis. First, all samples were examined cyto-microbiologically and all catalase-positive rods were differentiated using the direct transfer method in MALDI-TOF MS. C. bovis, C. amycolatum, C. xerosis, and five other species were identified with proportions of 90.1%, 7.7%, and 0.8% for the named species, respectively, and 1.4% for the remaining unnamed species. In addition, somatic cell count (SCC) was determined by flow cytometry. Based on this, the isolates were classified into four udder health groups: “latent infection”, “subclinical mastitis”, “clinical mastitis” and “others”. Approximately 90% of isolates of C. bovis and C. amycolatum were from latently and subclinically infected quarters. Of the C. bovis isolates, 5.8% were obtained from milk samples from clinical mastitis, whereas C. amycolatum was not present in clinical mastitis. The distribution of groups in these two species differed significantly. The geometric mean SCC of all species combined was 76,000 SCC/mL, almost the same as the SCC of C. bovis. With 50,000 SCC/mL, the SCC of C. amycolatum was slightly below the SCC of C. bovis. Through the species-level detection and consideration of SCC performed here, it is apparent that individual species differ in terms of their pathogenicity. Overall, their classification as minor pathogens with an SCC increase is confirmed.
Mastitis is one of the most important diseases threatening modern dairy herds. The idea of fighting the disease through colonising the udder with lactic acid bacteria (LAB), thereby building a beneficial biofilm, is the base for a probiotic approach towards mastitis control. The purpose of this study was to screen 13 LAB strains (eleven wild strains, two ATCC strains) inhibitory to the growth of mastitis-causing pathogens for their in vitro ability to form a biofilm and to adhere to bovine glandular mammary epithelium in order to assess their probiotic potential. Furthermore, we aimed to gain knowledge about the chemical nature of the adhesins involved by subjecting the bacteria to various chemical and enzymatical pre-treatments. The biofilms were grown on hydrophilic glass and on hydrophobic polypropylene in de Man, Rogosa and Sharpe (MRS) broth and afterwards quantified with a crystal violet assay. Biofilm formation was observed in all strains. However, the extent strongly depended on the strain, surface charge and medium. The adhesion assay also revealed a strong strain dependency, but this trait was also present in all of the investigated LAB isolates. Depending on the strain, chemical or enzymatical pre-treatment revealed carbohydrate molecules as well as proteins and lipids to be crucial for the adhesion of LAB to epithelial cells. The seven strains showing the strongest biofilm formation and/or adhesion represent promising candidates for further investigation in order to develop a probiotic remedy for the treatment of mastitis. Still, their safety for consumers and patients as well as their capability to colonise the udder remain to be investigated in in vivo studies.
To reduce ineffective antimicrobial usage in the treatment of non-severe clinical mastitis (CM) in cows with long-lasting udder diseases, non-antibiotic therapy with a non-steroidal anti-inflammatory drug (NSAID) was conducted and evaluated in a non-blinded, positively controlled, non-inferiority trial. Therefore, three-time systemic ketoprofen treatment at intervals of 24 h was evaluated in comparison with the reference treatment of solely antibiotic therapy in a field study on nine free-stall dairy farms located in Northern Germany. Cows with previous CM cases in current lactation and/or with long-lasting high somatic cell counts in preceding dairy herd improvement test days were randomly allocated to one of the two treatment groups in cases of mild to moderate CM. Quarter foremilk samples of the affected quarters were taken for cyto-bacteriological investigation before treatment as well as ~14 and 21 d after termination of therapy. Both treatment groups were compared regarding the bacteriological cure (BC) as the primary outcome. Clinical cure (CC) and no CM relapse within 60 d after the end of treatment (no R60) were chosen as secondary outcomes. The study resulted in the following outcomes: Streptococcus uberis was most frequently identified in microbiological culture from pre-treatment samples, followed by Staphylococcus aureus and Escherichia coli and other coliforms. No significant differences between the NSAID treatment and the reference treatment were detected regarding CC and CM recurrence (no R60). Although the sole ketoprofen therapy resulted in a numerically lower likelihood of BC, there were no significant differences to the reference treatment. Considering the selection criteria in this study, the results indicate that in mild to moderate CM cases exclusive treatment with ketoprofen may constitute an alternative to antimicrobial intramammary therapy, providing an opportunity for reduction of antibiotic usage. However, non-inferiority evaluations were inconclusive. Further investigations with a larger sample size are required to confirm the results and to make a distinct statement on non-inferiority.
This paper presents a databased approach for improving the precision of the moulding sand compressibility in the moulding sand mixer of a foundry. In this approach, the deviation between the measured and the target compressibility is reduced by controlling the water addition. The complex dynamic behaviour of the process variables and their influence on the water addition is modelled with a long short-term memory (LSTM) network. Another LSTM network as control path simulates the impact of the water addition on the compressibility. Simulation and experimental results with the applied model for water prediction in a feedforward control yield relevant improvements of the moulding sand compressibility.
Material tests were performed on a rediscovered Klimt-artwork “Trompetender Putto”. We performed studies on the red colored spots, mainly taken from non-restored parts. MIMOS II Fe-57 Mössbauer spectroscopy (novelty in art-pigment analysis) mainly reveals haematite and crystallized goethite in red colors. Electron microscopy can identify various layers of the original and overpainting of an artwork. The number of layers fluctuates between three and four chemically painted areas. The portable X-ray fluorescence analysis enables to reduce the pigment list to containing mercury (cinnabar), lead, zinc, iron and titanium. Infrared-lightirradiation visualizes the different age of the pigments.
The aim of this study was to define the time-related period of intramammary infections and its relation to risk factors for intramammary infections and clinical mastitis at cow and quarter levels. In total, 269 German Holstein Frisian dairy cows on three farms in Northern and Eastern Germany were included in this study. Quarter milk samples were collected at dry-off, 3 ± 1 days after calving and 17 ± 3 days after calving, for cytomicrobiological examination. Risk factors at quarter- and cow-level associated with intramammary infections and clinical mastitis were recorded during the trial period. Data were analyzed using logistic regression procedures and odds ratios were calculated. Calving for the second time increased the odds of clinical mastitis during the first 100 days of lactation compared to cows calving for the third time or more. A high milk yield after calving was a risk factor for new infections, with environmental pathogens 17 ± 3 days postpartum. A body condition score after calving less than 3.5 was associated with a decreased risk of having an intra-mammary infection (IMI) with non-aureus staphylococci and coryneforms 3 ± 1 days postpartum and consistent body condition between dry-off and early lactation decreased the risk of intramammary infections after calving. The absence of a ring of hyperkeratosis at the teat apex shown at dry-off was associated with a lower risk of intramammary infections with environmental pathogens 17 ± 3 days postpartum. This study shows the important influence of the dry period and early lactation on intramammary infections and clinical mastitis postpartum in dairy cows. Udder quarters may have eliminated pathogens during the dry period in 43.6% of cases in this study. Additionally, new infections occurred during early lactation, so 5.1% more quarters were infected 17 ± 3 days compared to 3 ± 1 days postpartum. New infections can be traced to non-aureus staphylococci and Staphylococcus aureus from dry-off up until 3 ± 1 days postpartum, and to non-aureus staphylococci, Staphylococcus aureus and Streptococcus uberis, after calving. In total, 88.7% of the infected quarters showed new infections with another pathogen species 3 ± 1 days postpartum than at dry-off, and 89.2% of the quarters 17 ± 3 days postpartum than 3 ± 1 days postpartum. In conclusion, the early lactation has just as important an influence on intramammary infections postpartum in dairy cows as the dry period. There is the possibility that udder quarters eliminate pathogens during the early lactation, especially during the dry period. However, there is also the danger that new infections manifest, with a large proportion of new infections occurring after calving. Thus, additional control strategies are of great importance to prevent new infections occurring during early lactation as well as during the dry period to reduce negative effects on milk yield and culling hazards in dairy cows by minimizing the associated risk factors
The objective of this study was to investigate the occurrence of bacteremia in dairy cows with severe mastitis. Milk samples were collected from affected udder quarters, and corresponding blood samples were collected from dairy cows with severe mastitis at the time of diagnosis before any therapeutic measures were undertaken. The cultural detection of pathogens in blood classified a bacteremia. Further diagnostic tests were performed to provide evidence of bacteremia. This was realized by PCR with regard to S. aureus, E. coli and S. uberis and the Limulus test. Detection of culturable pathogens in the blood of cows with severe clinical mastitis was rare and occurred in only one of 70 (1.4%) cases. Overall, bacterial growth was detected in 53 of 70 (75.7%) milk samples. S. uberis (22/70), E. coli (12/70) and S. aureus (4/70) were the most frequently isolated pathogens from milk of cows with severe mastitis. PCR was performed in 38 of 70 (54.3%) blood samples. PCR was positive in eight of 38 cases. S. uberis was found most frequently in six blood samples (8.6%). E. coli was found on PCR in one blood sample (1.4%). S. aureus was identified in one blood sample (1.4%). When Coliforms were detected in the quarter milk sample, a Limulus test was performed in the corresponding blood sample. In three of 15 cases, the Limulus test was positive (4.3% of samples). Further studies are needed to investigate the occurrence of bacteremia in cows with severe mastitis in a higher population size.
The control of clinical mastitis on dairy farms is an essential part of animal health management. Knowledge of the causative microorganisms, the cure rates achievable in the field and essential associated factors are crucial for proper control. The objectives of the present study were to characterize clinical mastitis cases in Germany and to analyze factors influencing cure rates and the recurrence rate. Milk samples of every clinical mastitis case occurring on 12 participating farms were examined cytomicrobiologically. Post-treatment quarter samples were taken after 14 and 21 days. Treatments were performed according to existing farm protocols. Of 2883 clinical mastitis cases, the most prevalent pathogens were Streptococcus (S.) uberis (20.2%) and coliforms (11.6%). In 35% of the milk samples, no bacteriological growth was detected. The overall bacteriological cure rate was 73.3%, while the cytological cure rate was 22.3%, the full cure rate 21.4% and the recurrence rate 18.8%. Regarding the pathogen distribution of severe mastitis, coliform bacteria were detected in 30.5% of the cases, whereas S. uberis was detected in 26.5% thereof. The results show that severe mastitis is caused almost as frequently by Gram-positive as by Gram-negative microorganisms. The low cytological cure rates show that the therapy needs to be further developed with regard to calming the inflammation. The obtained data can be very helpful in assessing internal mastitis scenarios and the effect of measures and therapies.
Streptococcus dysgalactiae is among the most important pathogens causing bovine mastitis. Unfortunately, there is presently a lack of clear knowledge about the mode of transmission — contagious or environmental — of this pathogen. To obtain more information on this, knowledge of the genetic diversity of the isolated microorganisms at the farm level can be useful. To observe the strain variety in different herds of cattle, isolates of Strep. dysgalactiae were collected from clinical mastitis samples at different farms, and the strains were typed using the pulsed-field gel electrophoresis (PFGE) method. Overall, we performed strain typing on 93 isolates from 16 farms in Germany and used an index to describe the degree of contagiosity of Strep. dysgalactiae at each farm. This index (CI) represents the number of isolates divided by the number of strains found in mastitis milk of clinical cases within a period of 14 months. The results differed between the farms. In one farm, all six Strep. dysgalactiae cases that occurred during the study period were caused by a single strain (CI = 6), while in another farm the six cases that occurred were caused by five different strains (CI = 1.2). All other farms fell between these two extremes. This indicates that Strep. dysgalactiae infections can occur via several routes of transmission. At the farm level, strain comparisons are necessary to determine the routes of transmission. Two strains were able to survive on the farm for a minimum of 14 months.
The bio-based plastic market is forecast to grow in the next years. With a growing market share and product range, the implementation of circular thinking is becoming more and more important also for bio-based plastics to enable a sound circular economy for these group of plastics. Therefore, it is important to assess the environmental performance for different end-of-life options of bio-based plastics from an early stage on. This review presents a comprehensive overview on the current status quo of different end-of-life options for bio-based plastics from an environmental perspective. Based on the status quo and the corresponding impact assessment results, the global plastic demand as well as the technical substitution potential of bio-based plastics, the environmental saving potential in case of the different end-of-life options was calculated. The review shows that there is a focus on polylactic acid (PLA) regarding end-of-life assessment, with studies covering all end-of-life options. The focus of the impact assessment has been set on global warming potential (GWP). With respect to GWP, the analysis of a future global potential of PLA showed, for mechanical recycling, the highest saving potential with 94.1 Mio. t CO2-eq. per year in comparison to virgin material.
In order to reduce antimicrobial treatment and prevent environmental mastitis, the aim of the present study was to investigate associations between herd level factors and microbial load on teat ends with environmental mastitis pathogens. Quarterly farm visits of 31 dairy farms over a one-year period were used for statistical analysis. During each farm visit, teat-skin swabs, bedding and air samples were taken and management practices and herd parameters were documented. Total mesophilic bacteria, esculin-positive streptococci and coliform bacteria were examined in the laboratory procedures from teat skin and environmental samples. Esculin-positive streptococci and coliform bacteria on teat ends increased with high temperature–humidity indices (THI) in the barn during the spring and summer. Significantly more coliform bacteria on teat ends were found in herds with an increased percentage of normal or slightly rough teat ends. Cleaning cubicles more frequently, pre-cleaning teats before milking as well as post-dipping them after milking had a decreasing effect of teat-skin load with total mesophilic and coliform bacteria at the herd level. To conclude, teat-skin bacterial load with environmental pathogens is subject to fluctuations and can be influenced by aspects of farm hygiene.
To reduce the negative effects of mastitis in dairy heifers in early lactation on the future milking performance, the aim of this study was to define the time-related period of intramammary infections and to relate this to risk factors at heifer and quarter level for intramammary infections and subclinical mastitis. In total, 279 German Holstein Frisian heifers in three farms in Northern and Eastern Germany were included in this study. Quarter milk samples for cytomicrobiological examination were collected 3 +- 1 days after calving and 17 +- 3 days after calving, and risk factors
at heifer and quarter level associated with intramammary infections and clinical mastitis were recorded during the trial period. Data were analyzed using logistic regression procedures and odds ratios were calculated. Calving at older ages increased the odds of intramammary infections with non-aureus staphylococci (NAS) and coryneforms 17 +- 3 days after calving compared to heifers calving at a younger age. Detaching of milking cups during milking is a risk factor for new infections between day 3 +- 1 and 17 +- 3 postpartum. The milk yield after calving is associated with a decrease in intramammary infections with environmental pathogens and clinical mastitis. A high milk yield assists the development of udder edema with an increased risk of intramammary infections with NAS and coryneforms. An increased somatic cell count (SCC) after calving increased the odds of intramammary infections with contagious pathogens 17 +- 3 days postpartum. The early lactation has an important influence on udder health and intramammary infections postpartum in dairy heifers. Udder quarters eliminated pathogens during early lactation by 6.9% for cases in
this study. New infections manifest themselves up until 17 +- 3 days postpartum, especially with Corynebacterium spp. and NAS. In total, 82.9% of the infected quarters showed new infections with another pathogen species 17 +- 3 days postpartum than 3 +- 1 days postpartum. In conclusion, the early lactation has an important influence on udder health and intramammary infections postpartum in heifers with the possibility that udder quarters eliminate pathogens, but also the danger that new infections manifest themselves. Thus, the prevention of new infections by minimizing the associated risk factors is of great importance.
This feasibility study investigates the flexural properties of biocomposites containing woven flax textiles (plain, twill, satin) and woven twill patterned hybrid textiles containing flax-/glass or flax-/carbon mixture for lightweight applications. Synthetic fibers are integrated as weft and flax fibers are integrated as warp yarns using a double-rapier weaving machine with a Jacquard attachment. The corresponding biocomposites are manufactured via vacuum infusion process using a biobased epoxy resin as a matrix. The manufactured biocomposites are analyzed with regard to their density and flexural properties. The results show that the use of hybrid textiles offers a promising solution for the manufacture of biocomposites with a higher biobased content and significantly improved flexural properties. Furthermore, the introduction of high-performance synthetic fibers in textiles enables the manufacture of biocomposites with an isotropic mechanical performance.
The aim of this study was to examine the opinions of farmers on a consulting project, which was established for organic dairy farms in Northern Germany involving different animal health experts who participated in the meetings. Furthermore, the properties of measures that are of decisive importance for implementation on the farms were identified to improve consultancy services for dairy farming. Once a year, the farmers met on a host-farm in one of three groups consisting of five to nine farms, a facilitator and an expert. At each meeting, a host-farm was visited and the analysed data of all participating farms of the previous year were presented to the group members. Each farmer had the possibility to report on success stories and issues concerning his herd. During discussions, the farmers first proposed mutual farm-specific measures for improving herd health and animal welfare. Afterwards, the expert named possible interventions and commented on the given measures of the farmers. All measures were noted by the facilitator. At the end of each meeting, each farmer could choose which of the given measures he wanted to implement. Open group-interviews as well as anonymous questionnaires for the farmers were used at the meetings in winter 2016/2017 to evaluate their perception of this consulting project and to determine which properties of measures were important for implementation on the farms. Based on the results of this study, the participating farmers were very positive towards this kind of consulting project. They favoured the participation of an expert during the meetings and the analysis of farm-specific data. Farmers mostly chose measures for implementation proposed by farmers and approved by the expert, followed by those proposed by the expert only. Measures were chosen when they were practical in the implementation, effective, efficient and took a low additional workload for implementation.
The antimicrobial activity of a phagemixture and a lactic acid bacteriumagainst Staphylococcus aureus isolates from bovine origin was investigated in vitro with regard to possible applications in the therapy of udder inflammation (mastitis) caused by bacterial infections. The S. aureus isolates used for inoculation derived from quarter foremilk samples of mastitis cases. For the examination of the antimicrobial activity, the reduction of the S. aureus germ density was determined [log10 cfu/mL]. The phage mixture consisted of the three obligatory lytic and S. aureus-specific phages STA1.ST29, EB1.ST11 and EB1.ST27 (1:1:1). The selected Lactobacillus plantarum strain with proven antimicrobial properties and the phage mixture were tested against S. aureus in milk, both alone and in combination. The application of the lactic acid bacterium showed only a low reduction ability for a 24 h incubation period. The bacteriophage mixture as well as its combination with the lactic acid bacterium showed high antimicrobial activity against S. aureus for a 24 h incubation period at 37 C, with only the phage mixture showing significance.
The aim of the current study was to investigate the effects of the prepartum external treatment of teats with a combination of four lactic acid bacteria strains viz. Lactobacillus (Lb.) rhamnosus ATCC 7469, Lactococcus lactis subsp. lactis ATCC 11454, Lb. paracasei 78/37 (DSM 26911), and Lb. plantarum 118/37 (DSM 26912) on the postcalving udder health of dairy heifers. The study used a split-udder design. Two weeks before the expected calving date, one of two contralateral teats of a teat pair was dipped with an aqueous suspension of lactic acid bacteria (final bacterial counts 8.40–8.47 log10-transformed CFU/mL) once in a week until calving; the other teat of the pair was not treated. After calving, quarter foremilk samples were taken and investigated cyto-microbiologically. In total, 629 teat pairs of 319 heifers were included. There was an association between the treatment and intramammary infections caused by the major udder-pathogenic bacteria Staphylococcus aureus, Streptococcus dysgalactiae, and enterococci, as well as clinical mastitis in the first 100 days after calving. The present study indicates that intramammary infections with major pathogens and clinical mastitis may be prevented by regular prepartum external application of lactic acid bacteria in dairy heifers.
The properties of these carbon nanostructures are determined by the structure and orientation of the graphitic domains during pyrolysis of carbon precursors. In this work, we investigated systematically the impact of creep stress during the stabilization process on the cyclization and molecular orientation of polyacrylonitrile as well as the graphitized structure after high temperature carbonization. Therefore, polyacrylonitrile (PAN) is electrospun and then stabilized with and without application of creep stress at different temperatures. The effect of creep stress on cyclization was monitored via Fourier transform IR spectroscopy (FTIR) and it was found that the degree of cyclization varies with the application of creep stress during the initial stages of cyclization at low temperatures (190°C and 210°C) in contrast to cyclization done at higher temperature (230°C). Herman molecular orientation factor was evaluated by polarized FTIR for PAN nanofibers cyclized with and without creep stress at 230°C-10 h. Subsequently, carbonization was performed at 1000°C and 1200°C for nanofibers cyclized at 230°C-10 h. Our results from XRD and Raman spectroscopy shows that the degree of graphitization and ordering of graphitic domains was enhanced for PAN nanofibers that were creep stressed during the cyclization process, even though both PAN nanofibers cyclized with creep stress and without creep stress showed the same amount of cyclized material. This increased degree of graphitization can be tracked to application of creep stress during the stabilization process which obviously favors the formation of sp2-hybridized carbon planes in the carbonization process. This finding highlights the impact of mechanical stress linking the cyclization of PAN nanofibers to graphitization.
Our results will pave the way for a deeper understanding of mechano-chemical processes to fabricate well-aligned graphitic domains which improves the mechanical and electrical properties of CNFs.
The present research study investigated the susceptibility of common mastitis pathogens—obtained from clinical mastitis cases on 58 Northern German dairy farms—to routinely used antimicrobials. The broth microdilution method was used for detecting the Minimal Inhibitory Concentration (MIC) of Streptococcus agalactiae (n = 51), Streptococcus dysgalactiae (n = 54), Streptococcus uberis (n = 50), Staphylococcus aureus (n = 85), non-aureus staphylococci (n = 88), Escherichia coli (n = 54) and Klebsiella species (n = 52). Streptococci and staphylococci were tested against cefquinome, cefoperazone, cephapirin, penicillin, oxacillin, cloxacillin, amoxicillin/clavulanic acid and cefalexin/kanamycin. Besides cefquinome and amoxicillin/clavulanic acid, Gram-negative pathogens were examined for their susceptibility to marbofloxacin and sulfamethoxazole/trimethoprim. The examined S. dysgalactiae isolates exhibited the comparatively lowest MICs. S. uberis and S. agalactiae were inhibited at higher amoxicillin/clavulanic acid and cephapirin concentration levels, whereas S. uberis isolates additionally exhibited elevated cefquinome MICs. Most Gram-positive mastitis pathogens were inhibited at higher cloxacillin than oxacillin concentrations. The MICs of Gram-negative pathogens were higher than previously reported, whereby 7.4%, 5.6% and 11.1% of E. coli isolates had MICs above the highest concentrations tested for cefquinome, marbofloxacin and sulfamethoxazole/trimethoprim, respectively. Individual isolates showed MICs at comparatively higher concentrations, leading to the hypothesis that a certain amount of mastitis pathogens on German dairy farms might be resistant to frequently used antimicrobials.
Mastitis poses a considerable threat to productivity and to animal welfare on modern dairy farms. However, the common way of antibiotic treatment does not always lead to a cure. Unsuccessful cures can, among other reasons, occur due to biofilm formation of the causative agent. This has attracted interest from researchers to introduce promising alternative therapeutic approaches, such as the use of beneficial lactic acid bacteria (LAB). In fact, using LAB for treating mastitis probably requires the formation of a beneficial biofilm by the probiotic bacteria. The present study investigated the ability of five LAB strains, selected on the basis of results from previous studies, to remove and to replace pathogenic biofilms in vitro. For this purpose, Staphylococcus (S.) aureus ATCC 12,600 and two strains—S. xylosus (35/07) and S. epidermidis (575/08)—belonging to the group of coagulase negative staphylococci (CNS) were allowed to form biofilms in a 96-well plate. Subsequently, the LAB were added to the well. The biofilm challenge was evaluated by scraping off and suspending the biofilm cells, followed by a plate count of serial dilutions using selective media. All the LAB strains successfully removed the staphylococcal biofilms. However, only Lactobacillus (L.) rhamnosus ATCC 7469 and L. plantarum 2/37 formed biofilms of their own to replace the pathogenic ones.
Food protein hydrolysates are often produced in unspecific industrial batch processes. The hydrolysates composition underlies process-related fluctuations and therefore the obtained peptide fingerprint and bioactive properties may vary. To overcome this obstacle and enable the production of specific hydrolysates with selected peptides, a ceramic capillary system was developed and characterized for the continuous production of a consistent peptide composition. Therefore, the protease Alcalase was immobilized on the surface of aminosilane modified yttria stabilized zirconia capillaries with a pore size of 1.5 μm. The loading capacity was 0.3 μg enzyme per mg of capillary with a residual enzyme activity of 43%. The enzyme specific peptide fingerprint produced with this proteolytic capillary reactor system correlated with the degree of hydrolysis, which can be controlled over the residence time by adjusting the flow rate. Common food proteins like casein, sunflower and lupin protein isolates were tested for continuous hydrolysis in the developed reactor system. The peptide formation was investigated by high-performance liquid chromatography. Various trends were found for the occurrence of specific peptides. Some are just intermediately occurring, while others cumulate by time. Thus, the developed continuous reactor system enables the production of specific peptides with desired bioactive properties.
Background: The topographical correlations between certain extracranial and intracranial osseous points of interest (POIs), and their age-related changes, are indispensable to know for a diagnostical or surgical access to intracranial structures; however, they are difficult to assess with conventional devices.
Materials and methods: In this pilot study, the 3-dimensional coordinates of extra-/intracranial POIs were determined, thus avoiding perspective distortions that used to be intrinsic problems in 2-dimensional morphometry. The data sets were then analysed by creating virtual triangles. The sizes, shapes, and positions of these triangles described the extent and the directions of the age-related shifts of the POIs. A selection of extracranial and intracranial POIs were marked on half skulls of four warmblood horses in two age groups (young: 6 weeks, n = 2; old: 14 and 17 years, n = 2). The x-, y-, and z-coordinates of these POIs were determined with a measurement arm (FaroArm Fusion, FARO Europe®). Direct distances between the POIs as well as their indirect distances on the x-, y-, and z-axis, and angles were calculated.
Results: The analysed virtual triangles revealed that some parts of the skull grew in size, but did not change in shape/relative proportions (proportional type of growth, as displayed by POI A and POI B at the Arcus zygomaticus). The same POIs (A and B) remained in a very stable relationship to their closest intracranial POI at the Basis cranii on the longitudinal axis, however, shifted markedly in the dorso-lateral direction. In contrast, a disproportional growth of other parts of the cranium was, for example, related to POI C at the Crista nuchae, which shifted strongly in the caudal direction with age. A topographically stable reference point (so-called anchor point) at the Basis cranii was difficult to determine.
Conclusions: Two candidates (one at the Synchondrosis intersphenoidalis, another one at the Synchondrosis sphenooccipitalis) were relatively stable in their positions. However, the epicentre of (neuro-)cranial growth could only be pinpointed to an area between them.
The objective of this study was to investigate the association between teat skin colonization and intramammary infection (IMI) with Staphylococcus aureus or Streptococcus agalactiae at the quarter level in herds with automatic milking systems. Milk and teat skin samples from 1,142 quarters were collected from 300 cows with somatic cell count >200,000 cells/mL from 8 herds positive for Strep. agalactiae. All milk and teat skin samples were cultured on calf blood agar and selective media. A subset of samples from 287 quarters was further analyzed using a PCR assay (Mastit4 PCR; DNA Diagnostic A/S, Risskov, Denmark). Bacterial culture detected Staph. aureus in 93 (8.1%) of the milk samples and 75 (6.6%) of the teat skin samples. Of these, 15 (1.3%) quarters were positive in both the teat skin and milk samples. Streptococcus agalactiae was cultured in 84 (7.4%) of the milk samples and 4 (0.35%) of the teat skin samples. Of these, 3 (0.26%) quarters were positive in both the teat skin and milk samples. The PCR detected Staph. aureus in 29 (10%) of the milk samples and 45 (16%) of the teat skin samples. Of these, 2 (0.7%) quarters were positive in both the teat skin and milk samples. Streptococcus agalactiae was detected in 40 (14%) of the milk samples and 51 (18%) of the teat skin samples. Of these, 16 (5.6%) quarters were positive in both the teat skin and milk samples. Logistic regression was used to investigate the association between teat skin colonization and IMI at the quarter level. Based on bacterial culture results, teat skin colonization with Staph. aureus resulted in 7.8 (95% confidence interval: 2.9; 20.6) times higher odds of Staph. aureus IMI, whereas herd was observed as a major confounder. However, results from the PCR analyses did not support this association. Streptococcus agalactiae was isolated from the teat skin with both PCR and bacterial culture, but the number of positive teat skin samples detected by culture was too low to proceed with further analysis. Based on the PCR results, Strep. agalactiae on teat skin resulted in 3.8 (1.4; 10.1) times higher odds of Strep. agalactiae IMI. Our results suggest that Staph. aureus and Strep. agalactiae on teat skin may be a risk factor for IMI with the same pathogens. Focus on proper teat skin hygiene is therefore recommended also in AMS.
Staphylococcus aureus is recognized worldwide as one of the major agents of dairy cow intra-mammary infections. This microorganism can express a wide spectrum of pathogenic factors used to attach, colonize, invade and infect the host. The present study evaluated 120 isolates from eight different countries that were genotyped by RS-PCR and investigated for 26 different virulence factors to increase the knowledge on the circulating genetic lineages among the cow population with mastitis. New genotypes were observed for South African strains while for all the other countries new variants of existing genotypes were detected. For each country, a specific genotypic pattern was found. Among the virulence factors, fmtB, cna, clfA and leucocidins genes were the most frequent. The sea and sei genes were present in seven out of eight countries; seh showed high frequency in South American countries (Brazil, Colombia, Argentina), while sel was harboured especially in one Mediterranean country (Tunisia). The etb, seb and see genes were not detected in any of the isolates, while only two isolates were MRSA (Germany and Italy) confirming the low diffusion of methicillin resistance microorganism among bovine mastitis isolates. This work demonstrated the wide variety of S. aureus genotypes found in dairy cattle worldwide. This condition suggests that considering the region of interest might help to formulate strategies for reducing the infection spreading.
A nonblinded, positively controlled, noninferiority trial was conducted to evaluate the efficacy of an alternative, nonantibiotic therapy with Masti Veyxym® to reduce ineffective antibiotic usage in the treatment of nonsevere clinical mastitis (CM) in cows with longer lasting udder diseases. The solely intramammary treatment with Masti Veyxym® (three applications, 12 hr apart) and the combined treatment with Masti Veyxym® and antibiotics as usual on the farm according to label of the respective product were compared with the reference treatment of solely antibiotic therapy. The matched field study was conducted on eight free-stall dairy farms located in Eastern Germany. Cases of mild-to-moderate CM in cows with longer lasting high somatic cell counts in preceding dairy herd improvement test days and with previous CM cases in current lactation were randomly allocated to one of the three treatment groups. A foremilk sample of the affected quarter was taken before treatment and again approximately 14 days and 21 days after the end of therapy for cyto-bacteriological examination. Primary outcomes were clinical cure (CC) and no CM recurrence within 60 days after the end of treatment (no R60). Bacteriological cure (BC) and quarter somatic cell count (QSCC) cure were chosen as secondary outcomes although low probabilities of BC and QSCC cure for selected cows were expected. The study resulted in the following findings: the pathogens mostly cultured from pretreatment samples were Streptococcus uberis, followed by Staphylococcus aureus and coagulase-negative staphylococci. There were no significant differences between the two test treatments in comparison with the reference treatment regarding all outcome variables. The sole therapy with Masti Veyxym® resulted in a numerically lower likelihood of BC without significant differences to the reference treatment. The combined therapy group showed a numerically higher nonrecurrence rate than the two other treatment groups and noninferiority compared to the reference treatment was proven. Having regard to the selection criteria of cows in this study, the findings indicated that sole treatment with Masti Veyxym® in nonsevere CM cases may constitute an alternative therapy to reduce antibiotics. However, noninferiority evaluations were mostly inconclusive. Further investigations with a larger sample size are required to confirm the results and to make a clear statement on noninferiority.
Streptococcus (S.) uberis is a causative agent for clinical and subclinical bovine mastitis which significance for the udder health has increased over the last decades. Molecular diagnosis methods revealed that S. uberis may be subdivided into many different varieties with different epidemiological properties. In addition, some varieties were reclassified as Streptococcus parauberis and Globicatella sanguinis. The present paper reviews S. uberis and its role in modern dairy farming. This pathogen is ubiquitous for which it is considered as environment- associated. Straw bedding and pasture, but also the bovine skin and digestive mucosae are typical localizations inhabited by S. uberis. Due to its capacity to persist within the mammary tissue, some infections may eventually turn cow-associated. In other cases, the infection is short, but in any case, there is a high risk of re-infection. Although many varieties remain susceptible to most antimicrobial agents, the problem for the dairy farm lies in the high rate of re-infection. This paper also reviews risk factors, therapies and measures to control S. uberis at farm level.
Of late, decrease in mineral oil supplies has stimulated research on use of biomass as an alternative energy source. Climate change has brought problems such as increased drought and erratic rains. This, together with a rise in land degeneration problems with concomitant loss in soil fertility has inspired the scientific world to look for alternative bio-energy species. Euphorbia tirucalli L., a tree with C3/CAM metabolism in leaves/stem, can be cultivated on marginal, arid land and could be a good alternative source of biofuel.
We analyzed a broad variety of E. tirucalli plants collected from different countries for their genetic diversity using AFLP. Physiological responses to induced drought stress were determined in a number of genotypes by monitoring growth parameters and influence on photosynthesis. For future breeding of economically interesting genotypes, rubber content and biogas production were quantified.
Cluster analysis shows that the studied genotypes are divided into two groups, African and mostly non-African genotypes. Different genotypes respond significantly different to various levels of water. Malate measurement indicates that there is induction of CAM in leaves following drought stress. Rubber content varies strongly between genotypes. An investigation of the biogas production capacities of six E. tirucalli genotypes reveals biogas yields higher than from rapeseed but lower than maize silage.
In der vorliegenden Arbeit, deren erster und zweiter Teil in den vorangegangenen Heften dieser Zeitschrift veröffentlicht wurden, werden die Kosten der “Weichkäserei” am Beispiel der Herstellung von Camembert- und Brie-Käse modellhaft bestimmt. Damit werden die im Jahr 1970 in gleicher Zeitschrift (Heft 5, Band 22) veröffentlichten Analysen der Produktionskosten in Camembertkäsereien hinsichtlich der Funktionsinhalte ausgedehnt und dem neuesten Stand der Technik sowie heutigen Produktionsstrukturen im Weichkäsesektor angepaßt. Gleichzeitig sind die generell für alle Modellabteilungen geltenden methodischen Weiterentwicklungen (2) in den Kalkulationen berücksichtigt worden. In den sechs Unterabteilungen Vorstapelung, Bruchbereitung/Portionierung, Umhorden/Salzen, Reifung, Abpackung und Fertiglager werden aus der Produktgruppe Weichkäse die Sorten Camembert mit 30 und 60 % F.i.Tr. sowie Brie mit 45 % F.i.Tr. in unterschiedlichen Stückgrößen hergestellt und hinsichtlich ihrer Kostenverursachung untersucht. Zur Bestimmung der Modellkosten wurden vier Modelle gebildet, deren Kapazitäten in der Kesselmilchverarbeitung zwischen 8.000 und 30.000 l/h liegen. In Abhängigkeit vom Beschäftigungsgrad, der für Werte zwischen 15 und 100 % simuliert wurde, können so die Kosten für Käsemengen zwischen rd. 700-17.0001 Käse/Jahr bestimmt werden.Nach den vorgegebenen Kapazitäten sind die technischen Voraussetzungen der einzelnen Unterabteilungen modellspezifisch festgelegt worden, wobei die technische Auslegung an eine verringerte Auslastung bei 65 und 33%iger Beschäftigung angepaßt wurde. Die zu tätigenden Investitionen für die Grundversion betragen 25,0 Mio DM im Modell 1 und 54,5 Mio DM im Modell 4. Bezogen auf die jeweilige Outputmenge an Käse ergeben sich hieraus spezifische Investitionen, die sich mit zunehmender Modellgröße von 5.125 auf 3.205 DM/t jährliche Käsemenge erheblich senken. Produktspezifische Investitionen und Faktormengenverbräuche führen zu den Einzelkosten der ausgewählten Weichkäseprodukte, die z.B. für den Camembert mit 60 % F.i.Tr. je nach Modellgrößeund Beschäftigungsgrad zwischen 500,7 Pf/kg und 620,2 Pf/kg Käse liegen. Die Gesamtkosten der Abteilung “Weichkäserei”, die sich aus den Einzelkosten der Produkte und den Einzelkosten der Abteilung zusammensetzen, betragen im größten Modell bei 100%iger Beschäftigung 522,1 Pf/kg Käse, die sich im kleinsten Modell bei nur 15%iger Beschäftigung auf 1.027,6 Pf/kg Käse erhöhen. Bei einem Beschäftigungsgrad von 65 %, dem die Produktionsmenge eines 2-Schichtbetriebes zugeordnet ist, entfallen von den Gesamtkosten der Abteilung je nach Modellgröße 62-72 % auf die Rohstoffkosten, 14-20 % auf die Anlagekosten und 4-7 % auf die Personalkosten, während die übrigen Kostenartengruppen nur von geringerer Bedeutung sind. Betrachtet man die Gesamtkosten (ohne Rohstoffkosten) hinsichtlich ihrer Entstehung in den Unterabteilungen, so ist festzustellen, daß die Unterabteilungen Bruchbereitung/Portionierung sowie Abpackung die höchsten Kosten verursachen. Für einen Beschäftigungsgrad von 65 % betragen die Kosten in den Unterabteilungen Bruchbereitung/Portionierung im Modell 1 85,8 Pf/kg, die mit zunehmender Modellgröße auf 45,9 Pf/kg im Modell 4 zurückgehen. Die Kosten für die Abpackung liegen im Modell 1 bei 76,2 Pf/kg, während sie im Modell 4 nur noch 58,3 Pf/kg betragen. Die geringsten Kosten verursacht die Unterabteilung Fertiglager mit 2,6 Pf/kg im kleinsten und 1,5 Pf/kg im größten Modell bei 65%iger Beschäftigung. Die Ergebnisse der Modellabteilungsrechnung lassen erkennen, daß mit zunehmender Kapazitätsgröße und ansteigendem Beschäftigungsgrad erhebliche Stückkostendegressionen zu erreichen sind, die bei betriebsindividuellen oder branchenbedingten Entscheidungen genutzt werden sollten. So empfiehlt es sich, daß auf eine dem Markt angepaßte Produktion auch eine auf die geplante Tagesproduktionsmenge angepaßte Ausstattung der Abteilung folgt, da sich, wie in den Modellkostenkurven bei 65 und 33 % Beschäftigung dargestellt, die Kosten sprunghaft senken können. Kostendegressionseffekte werden auch erreicht, wenn durch Spezialisierung der Stückkäse-Produktion die Vielfalt der Formatgrößen eingeschränkt werden kann. Das höchste Kosteneinsparungspotential ist aber durch Strukturveränderungen im Weichkäsesektor zu erwarten, die, wie an zwei Beispielen erläutert, der Branche langfristige Kosteneinsparungen von rd.25 bzw. 95 Mio DM/Jahr ermöglichen können.
Im zweiten Teil dieser Arbeit bilden gemäß den allgemeinen technischen Prozeßbedingungen die maschinellen und baulichen Ausrüstungen der vier Modelle, deren Investitionsbeträge, Nutzungsdauer und Instandhaltungsquote unterabteilungsweise dargestellt sind, den Ausgangspunkt dieses Themenbereiches. Eine Anpassung der technischen Auslegung an eine verringerte Auslastung erfolgte bei einer 65%igen und 33%igen Beschäftigung. Die zu tätigenden Investitionen für die Grundversion (100 % Beschäftigung) betragen im Modell 1 25,0 Mio. DM und im Modell 4 54,5 Mio. DM. Die Mengenverbräuche der Produktionsfaktoren Rohstoff, Personal, Energie, Betriebs- und Hilfsstoffe sowie Reparaturen sind von den spezifischen Modellausstattungen abgeleitet. Es ergeben sich Faktoreinsatzmengen, die mengenproportional auftreten und den Produkten zugeordnet sind, sowie periodenabhängige fixe Verbrauche, die der Abteilung angelastet werden. Anhand einer ausgewählten Beschäftigungssituation, die einem 2-Schichtbetrieb bei 250 Produktionstagen entspricht, wird aufgezeigt, wie sich die auf Abteilungsebene aggregierten Faktoreinsatzmengen in Abhängigkeit von der Modellgröße gestalten. So ergibt sich z.B. im Bereich des Produktionsfaktors Personal, daß für das Modell 1 eine Beschäftigungszahl an Arbeitskräften von 25 und im Modell 4 von 40 vorgesehen ist.
In dem vorliegenden Teil 1 der Arbeit werden die Grundlagen und die Rohstoffmengenrechnung zur Ermittlung der Modellkosten in der Abteilung Weichkäserei dargestellt. In sechs Unterabteilungen - Vorstapelung, Bruchbereitung und Portionierung, Umhorden/Salzen, Reifung, Abpackung, Fertiglager - werden aus der Produktgruppe Weichkäse die Sorten Camembert 30 und 60 % F.i.Tr. sowie Brie 45 % F.i.Tr. mit unterschiedlichen Stückgewichten hergestellt und diese hinsichtlich ihrer Kostenverursachung untersucht. Zur Kalkulation der Modellkosten werden 4 Modelle gebildet, deren Verarbeitungskapazität an Kesselmilch zwischen 8.000 und 30.000 l/h liegen. In Abhängigkeit vom Beschäftigungsgrad, der für Werte zwischen 15 % und 100 % simuliert wurde, können so Kosten für Käsemengen zwischen rd. 700 und 17.0001 Käse/Jahr bestimmt werden. Da der Rohstoff Milch im kostenrechnerischen Ansatz als der wichtigste Kostenfaktor gilt, wird der verursachungsgerechten Rohstoffverbrauchsbestimmung in diesem Teil ein gesondertes Kapitel gewidmet. Die Arbeit wird mit dem Teil 2 ''Modellspezifischer Faktoreinsatz'' fortgesetzt, dem abschließend der Teil 3 "Ergebnisse und Interpretation der Modellkalkulation" folgt.
Struktureffekte bei der Schnittkäseproduktion. Thesen und Argumente zur Molkereistruktur Teil III
(1990)
Im Rahmen dieses Beitrages wird die Wechselwirkung zwischen abteilungsspezifischen Produktionskosten und der Struktur von Produktionsabteilungen für die Herstellung von Schnittkäse untersucht. Die Analyse eventueller Struktureffekte geschieht in zwei Schritten: zuerst wird der Einfluß unterschiedlicher Kapazitätsgrößen und -auslastungen von Käsereiabteilungen auf die Produktionskosten bestimmt. Danach wird der Frage nachgegangen, wie die Produktionsstrukturen für Schnittkäse in der BR Deutschland aussehen und welche Kosteneinsparungspotentiale sich bei moderaten Strukturveränderungen ergeben.
Die Serie von Modellabteilungsrechnungen wird mit der Untersuchung des Kostenverlaufs in der Abteilung Weichkäse fortgefuhrt, um einen weiteren Baustein zur Bestimmung optimaler Produktionsstrukturen zu erhalten. Als Ausgangsposition dieser Themenstellung soll im folgenden die Modellabteilung Weichkäse Gestalt annehmen. Dazu sind drei Arbeitsschritte notwendig: die Festlegung des zu untersuchenden Produktes, die inhaltliche Abgrenzung der zu bildenden Modellabteilung und die Auswahl des Fertigungsverfahrens.
In der vorliegenden Arbeit, deren erster Teil in Heft 2 dieser Zeitschrift veröffentlicht wurde, werden die Kosten der “Schnittkäserei” am Beispiel der Herstellung von Gouda-Käse modellhaft bestimmt, wobei die vor 17 Jahren durchgeführten Modellkalkulationen für Edamerkäse hinsichtlich der Funktionsinhalte der Abteilung ausgedehnt und dem neuesten Stand der Technik sowie heutigen Schnittkäsereiproduktionsstrukturen angepaßt wurden. Zudem sind die generell für alle Modellabteilungen geltenden methodischen Weiterentwicklungen in den Kalkulationen berücksichtigt worden. In den sechs Unterabteilungen Vorstapelung, Bruchbereitung und Pressen, Salzbad, Käsebehandlung und Reifungslager, Abpackung sowie Versandkühlraum und Expedition wird ein rindengereifter Gouda-Käse (12-kg-Laib) hergestellt und hinsichtlich seiner Kostenverursachung untersucht. Zur Bestimmung der Modellkosten wurden vier Modelle gebildet, deren Kapazitäten in der Kesselmilchverarbeitung zwischen 8.000 und 48.000 l/h liegen. In Abhängigkeit vom Beschäftigungsgrad, der für Werte zwischen 21 und 100% simuliert wurde, können so die Kosten für Käsemengen zwischen rd. 5.100 und 30.8001 Käse/Jahr bestimmt werden. Gemäß den vorgegebenen Kapazitäten müssen die technischen Voraussetzungen für die Ausgestaltung der einzelnen Unterabteilungen modellspezifisch festgelegt werden, wobei eine Anpassung der technischen Auslegung an eine verringerte Auslastung bei 33%iger Beschäftigung erfolgt. Die zu tätigenden Investitionen für die Grundversion betragen 10,6 Mio. DM in Modell 1 und 40,3 Mio. DM in Modell 4. Bezogen auf die jeweilige Rohstoffeinsatzmenge ergeben sich hieraus spezifische Investitionen, die mit zunehmender Modellgröße erheblich sinken: Machen sie im Modell 1 noch 215,6 Tsd. DM/1 Mio. kg jährlicher Rohstoffeinsatzmenge aus, so verringern sie sich im Modell 4 auf 135,3 Tsd. DM/1 Mio. kg.
Produktspezifische Investitionen und Faktormengenverbräuche führen zu den Einzelkosten des Produktes Gouda, die je nach Modellgröße und Beschäftigungsgrad zwischen 510,8 und 538,5 Pf/kg Käse liegen. Die Gesamtkosten der “Schnittkäserei”, die sich aus den Einzelkosten des Produktes Gouda und den Einzelkosten der Abteilung zusammensetzen, betragen 530,9 bis 654,3 Pf/kg Käse. Den größten Anteil an den Gesamtkosten haben die Rohstoffkosten (73 bis 90%). Der Anteil der Anlagekosten schwankt je nach Beschäftigung zwischen 4 und 18%, während die Personal- und sonstige Betriebskosten im Vergleich zu den beiden vorgenannten Kostenartengruppen in allen Modellen nur eine geringere Bedeutung haben. Betrachtet man die Gesamtkosten (ohne Rohstoffkosten) hinsichtlich ihrer Entstehung in den Unterabteilungen, so ist festzustellen, daß die höchsten Kosten in der Unterabteilung Bruchbereitung und Pressen anfallen: Bei einer 100%igen Beschäftigung betragen sie z.B. in Modell 3 42% der Gesamtkosten (ohne Rohstoff). Die geringsten Kosten (2%) fallen dagegen in der Unterabteilung Versandkühlraum und Expedition an. Die Kostenanalyse zeigt deutlich, daß mit zunehmender Modellgröße und steigender Produktionsmenge erhebliche Stückkostendegressionen zu erzielen sind, wobei der Einfluß des Beschäftigungsgrades auf die Kostendegression deutlich höher ist als derjenige der Modellgröße.
In dem vorliegenden 1. Teil der Arbeit werden die Grundlagen und der spezifische Faktoreinsatz der Modellabteilung „Schnittkäserei” dargestellt.
In den sechs Unterabteilungen Vorstapelung, Bruchbereitung und Pressen, Salzbad, Käsebehandlung und Reifungslager, Abpackung sowie Versandkühlraum und Expedition wird ein rindengereifter Gouda-Käse (12-kg-Laib) hergestellt und hin sichtlich seiner Kostenverursachung untersucht. Zur Bestimmung der Modellkosten wurden vier Modelle gebildet, deren Kapazitäten in der Kesselmilchverarbeitung zwischen 8.000 und 48.000 l/h liegen. In Abhängigkeit vom Beschäftigungsgrad, der für Werte zwischen 21 und 100% simuliert wurde, können so die Kosten für Käsemengen zwischen rd. 5.100 und 30.800 l Käse/Jahr bestimmt werden.
Gemäß den vorgegebenen Kapazitäten müssen die technischen Voraussetzungen für die Ausgestaltung der einzelnen Unterabteilungen modellspezifisch festgelegt werden, wobei eine Anpassung der technischen Auslegung an eine verringerte Auslastung bei 33%iger Beschäftigung erfolgt.
Diese Arbeit wird fortgesetzt mit dem Teil 2 „Ergebnisse und Interpretation der Modellkalkulationen” in Heft 3 (1993) dieser Zeitschrift.
Die Analyse von Struktureffekten in der „Allgemeine Milchbehandlung“ wird anhand zweier Fragen vorgenommen:
1. Welche Effekte hat die Größe der Abteilung auf die Produktionskosten?
2. Welche Kosteneinsparungen hätten - ausgehend von der bundesdeutschen Ist-Struktur milchverarbeitender Betriebsstätten - moderate Strukturveränderungen zur
Folge?
Methodische Weiterentwicklungen der Modellabteilungsrechnung für milchwirtschaftliche Betriebe
(1990)
Vor 15 Jahren wurde der erste Beitrag einer Serie von Modellabteilungsrechnungen mit dem Ziel veröffentlicht, der Praxis und Wissenschaft nachvollziehbare Planungshilfen
für die Gestaltung optimaler Produktionsstrukturen in der Milchwirtschaft an die Hand zu geben. Dieses Ziel gilt auch heute noch, jedoch hat sich im Laufe der Zeit immer
deutlicher herauskristallisiert, daß eine Fortschreibung der Faktorpreise sowie eine gelegentliche Aktualisierung der Faktormengenverbräuche in Anpassung an neue technologische Entwicklungen allein nicht ausreichen, die selbstgesetzen Ansprüche an die Modellabteilungsrechnung zu erfüllen.
Die Milchwirtschaft will höhere Preise für Speisequark erlösen. Begründet wird dies mit der in der Bundesrepublik Deutschland gesetzlich verordneten Trockenmasseanhebung des Speisequarks von 17% auf 18%. Da diese Änderung zum 1. Januar 1987 bereits in Kraft trat und den Molkereiunternehmen lange vorher bekannt war, ist die Frage zu stellen, warum eine Änderung der variablen Kosten, von der alle Hersteller gleichermaßen betroffen sind, so schwer am Markt in entsprechende Preisanhebungen umzusetzen ist.
In der vorliegenden Arbeit werden die Kosten für die Produktion von Speisequark mager und Speisequark 40 % F.i.Tr. für zwei Kapazitätsgrößen von 4.800 bzw. 9.500 kg Km/h nach einer speziellen Form der Teilkostenrechnung bestimmt. Bei Variationen der Kapazitätsauslastung (Pro
duktionstage X Produktionsstunden/Tag) und der Produktanteile ergeben sich Kosten zwischen 11,99 und 18,95 Pf pro Becher Speisequark mager bzw. 11,73 und 18,45 Pf je Becher Speisequark 40% F.i.Tr. Das entspricht einer Differenz in den Stückkosten von durchschnittlich 27,5 Pf/kg Speisequark. Es zeigt sich dabei, daß die Kostendegression bedeutend stärker durch den Grad der Kapazitätsauslastung als durch die Kapazitätsgröße beeinflußt wird.
Für die Produktion von drei Sorten stichfestem Joghurt (Natur, mit unterlegter Frucht und Mix) werden die Kosten nach einer speziellen Form der Teilkostenrechnung in Abhängigkeit von der Kapazitätsauslastung bestimmt. Es werden drei Modelle mit unterschiedlicher Kapazitätsgröße dargestellt: 6500, 13.000 und 26.000 Becher/h. Durch Variationen der Produktmenge, Produktionstage und Produktanteile ergeben sich Kosten zwischen 12,6 und 9,3 Pf/Becher Joghurt Natur bzw. 18,7 und 15,5 Pf/Becher Joghurt mit unterlegter Frucht bzw. 17,0 und 14,0 Pf/Becher Joghurt Mix. Je nach Produktionsbedingungen können Stückkostendifferenzen von über 20 Pfennig je kg Produkt auftreten.
In der vorliegenden Arbeit werden die Kosten der Sprühtrocknung bei drei verschiedenen Kapazitätsgrößen mit jeweils variierender Kapazitätsauslastung nach einer speziellen Form der Teilkostenrechnung bestimmt. Die Kapazitätsgrößen betragen 10800, 21600 und 32400 kg Magermilch pro Stunde. Die verarbeiteten Milchmengen liegen
zwischen 12,8 Mio. und 256,6 Mio. kg im Jahr; dabei variieen die Stückkosten zwischen 4,80 und 1,78 Pf/kg Mm. Es hat sich dabei gezeigt, daß die Kostendegression bedeutend stärker durch den Grad der Kapazitätsauslastung als durch die Kapazitätsgröße beeinflußt wird.
In dieser Arbeit werden die Grundlagen zur Bestimmung des Kostenverlaufs einzelner ausgewählter Molkereibetriebsabteilungen bei unterschiedlichen Kapazitätsgrößen und -auslastungen bestimmt. Den Produkten (Abteilungen) werden die mengenproportionalen Produkteinzelkosten zugerechnet sowie die Gemeinkosten der Abteilung, die sich aus jahresfixen, tagesfixen und chargenfixen Kosten zusammensetzen. Für Energie werden lediglich mengenproportionale Kosten in Ansatz gebracht. Die sonstigen Kosten der Hilfskostenstellen werden grundsätzlich nicht auf die Produkte bzw. Abteilungen umgelegt; sie werden im letzten Teil dieser Veröffentlichungsreihe behandelt. Die objektive Vergleichbarkeit der Kosten kann so gewährleistet werden. Ein wichtiger Bestandteil dieser Arbeit war die Entwicklung eines für alle Abteilungen brauchbaren Simulationsmodells, das für den Einsatz in der EDV konzipiert wurde. Neben der Berechnung der anfallenden Kosten bei unterschiedlichen Anlagengrößen sind bei dem Computermodell beliebige Variationen der folgenden Faktoren möglich. Dadurch können die Auswirkungen eines veränderten Beschäftigungsgrades bzw. einer anderen Kapazitätsauslastung auf die Stückkosten der einzelnen Produkte ermittelt werden. Es ist vorgesehen, die Daten über Jahre hinaus auf dem neuesten Stand zu halten und zu veröffentlichen.
Die Funktion eines Gebäudes, seine flächenmäßige Ausdehnung und seine Gliederung sowie seine Einbettung in die Umgebung bestimmen letztendlich die Dachkonstruktion. Der Planer steht hierbei vor der Aufgabe, unter Beachtung aller bauphysikalischen wie bautechnischen Gegebenheiten ein Optimum an gestalterischer Qualität bei Respektierung wirtschaftlicher und baupraktischer Belange zu realisieren, wobei zu beachten ist, dass gerade das Dach von den die Gebäudehülle bildenden Bauteilen der größten und unmittelbarsten Beanspruchung unterliegt.
Nur wenn eine klebgerecht ausgeführte Konstruktion mit dem richtigen Klebstoff nach optimaler Oberflächenbehandlung und mit angepssten Abbindebedingungen gefertigt wird, sind Klebverbindungen von maximaler Festigkeit und Alterungsbeständigkeit zu erzielen. Am Beispiel von Bremsbelägen wird gezeigt, dass bei einer entsprechenden Erprobung auch sogenannte Sicherheitsteile durch Kleben hergestellt werden könne.
Fenster versorgen die Innenräume mit Tageslicht, dienen der Lufterneuerung in den Räumen und schützen vor Umwelteinflüssen wie Kälte, Wärme, Lärm, Wind und Niederschlägen. Entsprechend weitgefächert ist das Spektrum deer planungsrelevanten Aspekte. Sowohl licht-, lüftungs-, wärme-, schall und wohntechnische als auch hygienische, psychologische und nicht zuletzt wirtschaftliche Gesichtspunkte sind bei edr täglichen Arbeit zu beachten.
Die empfindliche Verteuerung des Rohöls im Laufe der letzten Jahre und die in ihrem Sog erfolgten Preissteigerungen auch für die anderen Energieträger haben Energie zu einem besonders kostbaren Wirtschaftsgut werden lassen. Es ist ganz deutlich geworden, dass Energie in allen Lebens- und Produktionsbereichen äußerst sparsam verwendet und optimal genutzt werden muss. Mittel- und langfristig gesehen sind daher gezielt Anstrengungen zu unternehmen, nicht einen Brennstoff durch einen anderen zu ersetzen, sondern - wo immer auch möglich - die natürlcihen Energiequellen zu nutzem.
In den letzten Jahren hat sich der Trend zu forcierter Rationalisierung, zur Automatisierung und Mechanisierung der Produktion beschleunigt. Automatisierung erfordert aber hohe Inverstitionen und lässt so den Fixkostenblock wachsen. Bei einem Rückgang der Kapazitätsauslastung rutscht das Unternehmen aber rasch in die Verlustzone. Deshalb erscheint eine Rückbesinnung auf eher flexiblere, arbeitsorientierte Organisationskonzepte sinnvoll. Vorgestellt wird ein kybernetisches Regelkreismodell mit flacher Hierarchie als "Klammer" und sich weitgehend selbstregulierenden Unternehmenseinheiten.