Open Access

Proceedings of the OPU-HsH symposium on Industry 4.0 and Society 5.0. The symposium was held on February 15th 2023 in Okayama, Japan with members of the Okayama Prefectual University and the Hochschule Hannover. It was sponsored by the Sakura Science Program of Japan.

During machine milking, pathogenic microorganisms can be transmitted from cow to cow through liners. Therefore, in Germany, a spray method for the intermediate disinfection of the milking cluster is often used for prevention. This method of cluster disinfection is easy to perform, requires little time and no extra materials, and the disinfection solution is safe from outside contamination in the spray bottle. Since no data on a systematic efficacy trial are available, the aim of this study was to determine the microbial reduction effect of intermediate disinfection. Therefore, laboratory and field trials were conducted. In both trials, two sprays of 0.85 mL per burst of different disinfectant solutions were sprayed into the contaminated liners. For sampling, a quantitative swabbing method using a modified wet–dry swab (WDS) technique based on DIN 10113-1: 1997-07 was applied. Thus, the effectiveness of disinfectants based on Peracetic Acid, Hydrogen Peroxide and Plasma-Activated Buffered Solution (PABS) was compared. In the laboratory trial, the inner surfaces of liners were contaminated with pure cultures of Escherichia (E.) coli, Staphylococcus (S.) aureus, Streptococcus (Sc.) uberis and Sc. agalactiae. The disinfection of the contaminated liners with the disinfectants resulted in a significant reduction in bacteria with values averaging 1 log for E. coli, 0.7 log for S. aureus, 0.7 log for Sc. uberis and 0.8 log for Sc. agalactiae. The highest reduction was obtained for contamination with E. coli (1.3 log) and Sc. uberis (0.8 log) when PABS was applied and for contamination with S. aureus (1.1 log) and Sc. agalactiae (1 log) when Peracetic Acid Solution (PAS) was used. Treatment with sterile water only led to an average reduction of 0.4 log. In the field trial, after the milking of 575 cows, the liners were disinfected and the total microorganism count from the liner surface was performed. The reduction was measured against an untreated liner within the cluster. Although a reduction in microorganisms was achieved in the field trial, it was not significant. When using PAS, a log reduction of 0.3 was achieved; when using PABS, a log reduction of 0.2 was obtained. The difference between the two disinfection methods was also not significant. Treatment with sterile water only led to a reduction of 0.1 log. The results show that spray disinfection under these circumstances does result in a reduction in the bacteria on the milking liner surface, but for effective disinfection a higher reduction would be preferred.

We present a methodology based on mixed-integer nonlinear model predictive control for a real-time building energy management system in application to a single-family house with a combined heat and power (CHP) unit. The developed strategy successfully deals with the switching behavior of the system components as well as minimum admissible operating time constraints by use of a special switch-cost-aware rounding procedure. The quality of the presented solution is evaluated in comparison to the globally optimal dynamic programming method and conventional rule-based control strategy. Based on a real-world scenario, we show that our approach is more than real-time capable while maintaining high correspondence with the globally optimal solution. We achieve an average optimality gap of 2.5% compared to 20% for a conventional control approach, and are faster and more scalable than a dynamic programming approach.

We present a novel long short-term memory (LSTM) approach for time-series prediction of the sand demand which arises from preparing the sand moulds for the iron casting process of a foundry. With our approach, we contribute to qualify LSTM and its combination with feedback-corrected optimal scheduling for industrial processes. The sand is produced in an energy intensive mixing process which is controlled by optimal scheduling. The optimal scheduling is solved for a fixed prediction horizon. One major influencing factor is the sand demand, which is highly disturbed, for example due to production interruptions. The causes of production interruptions are in general physically unknown. We assume that information about the future behavior of the sand demand is included in current and past process data. Therefore, we choose LSTM networks for predicting the time-series of the sand demand. The sand demand prediction is performed by our multi model approach. This approach outperforms the currently used naive estimation, even when predicting far into the future. Our LSTM based prediction approach can forecast the sand demand with a conformity up to 38 % and a mean value accuracy of approximately 99%. Simulating the optimal scheduling with sand demand prediction leads to an improvement in energy savings of approximately 1.1% compared to the naive estimation. The application of our novel approach at the real production plant of a foundry proves the simulation results and verifies the capability of our approach.

Although Corynebacterium spp. can be regularly associated with subclinical and clinical mastitis cases in dairy cows, knowledge on their reservoirs in dairy farms is sparse. Therefore, samples were collected at 10 visits with 14 day intervals from bedding material (n = 50), drinking troughs (n = 20), different walking areas (n = 60), cow brushes (n = 8), fly traps (n = 4), the passage to pasture (n = 9) as well as milking liners (n = 80) and milker gloves (n = 20) in one dairy cow farm. Additionally, quarter foremilk samples from all lactating cows (approximately 200) were collected at each visit. All samples underwent microbiological examination and cultured isolates were identified using MALDI-TOF MS. Most Corynebacterium spp. that were cultivated from milk were also isolated from the housing environment and milking-related niches (C. amycolatum, C. confusum, C. stationis, C. variabile, C. xerosis) or from milking-related niches only (C. frankenforstense, C. pilosum, C. suicordis). C. bovis was not cultivated from any environmental niche, while being the dominant species in milk samples. This study demonstrates that many Corynebacterium spp. present in milk samples can also be isolated from the cows’ environment. For C. bovis, the most relevant Corynebacterium species with regard to intramammary infections, it indicates that environmental reservoirs are of little relevance.